Maskless Single-Sided Wet Etching Process for the Fabrication of Ultra-Low Distortion Polyimide Membranes | IBOOK.PUB

Maskless Single-Sided Wet Etching Process for the Fabrication of Ultra-Low Distortion Polyimide Membranes

PDF / 470,844 Bytes
6 Pages / 414.72 x 648 pts Page_size
95 Downloads / 160 Views

MASKLESS SINGLE-SIDED WET ETCHING PROCESS FOR THE FABRICATION OF ULTRA-LOW DISTORTION POLYIMIDE MEMBRANES M.L. SCHATIENBURG, R.I. FUENTES,* G. CZERNIENKO, R.C. FLEMING, AND J. PORTER Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139. *Materials and Technologies Corporation, 341 Sheafe Road, Poughkeepsie, NY 12601. ABSTRACT A process for volume production of ultra-low distortion (

Data Loading...

Recommend Documents

Fabrication of ultralow-density quantum dots by droplet etching epitaxy

201 31 485KB

Wet Chemical Etching of Zn-containing oxides and HfO2 for the fabrication of Transparent TFTs

157 81 1020KB

Highly selective photoenhanced wet etching of GaN for defect investigation and device fabrication

191 74 1MB

Wet Etching of Bulk AlN Crystals

173 1 602KB

Wet Chemical Etching of AlN Single Crystals

184 91 452KB

Fabrication and Optical Pumping of Laser Cavities Made by Cleaving and Wet Chemical Etching

196 112 368KB

Maskless Laser Etching of Alumina and Ceramic Substrates

146 10 2MB

Preliminary Investigation of a Sacrificial Process for Fabrication of Polymer Membranes with Sub-Micron Thickness

146 15 238KB

Nanostructure Fabrication: Dry Etching Damage

198 41 591KB

Fabrication And Application Of Zeolite Membranes

201 5 909KB

Faceting of Single-Crystal SrTiO 3 During Wet Chemical Etching

210 20 72KB

Sharp Needles: Fabrication of Tungsten Nanotips by AC Electrochemical Etching and Laser Enhanced Etching for Nanoprobing

169 116 3MB