• PDF / 1,183,013 Bytes
• 4 Pages / 593.972 x 792 pts Page_size
• 56 Downloads / 238 Views

DOWNLOAD

REPORT

In recent years, austenitic high Mn steels have received a great deal of attention since they show an excellent combination of high strength and large ductility.[1–3] It has been shown that the deformation behavior of these austenitic high Mn steels is strongly dependent on their stacking fault energies (SFEs); the steels show the transformation-induced plasticity (TRIP) for SFE< ~18 mJ m2, the twinning-induced plasticity (TWIP) for ~18 mJ m2

Recommend Documents

Microstructural Evolution in an Fe-10Ni-0.1C Steel During Heat Treatment and High Strain-Rate Deformation

195 97 17MB

Microstructural evolution during laser cladding of M2 high-speed steel

197 106 2MB

On the Evolution of Primary Gamma Prime Precipitates During High Temperature and High Strain Rate Deformation and Subseq

174 8 4MB

Microstructural Evolution during Superplastic Deformation in Large-grained Iron Aluminides

206 74 2MB

Microstructural refinement and deformation twinning during severe plastic deformation of 316L stainless steel at high te

288 44 2MB

Strain-induced grain evolution in polycrystalline copper during warm deformation

181 4 1MB

Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression

186 94 2MB

High strain-rate-induced cleavage fracture in mild carbon steel

215 34 2MB

Microstructural evolution and thermal stability of 1050 commercial pure aluminum processed by high-strain-rate deformati

215 21 636KB

Microstructural Evolution during Superplastic Deformation of Titanium Aluminides

196 10 3MB

Hot deformation behavior and microstructural evolution of Nb-V-Ti microalloyed ultra-high strength steel

208 106 931KB

Hot Deformation Behavior and Microstructural Evolution of a Nickel-Free Austenitic Steel with High Nitrogen Content

199 100 773KB