Monitoring and Evaluation of Production Processes An Analysis of the
This book presents topics on monitoring and evaluation of production processes in the automotive industry. Regulation of production processes is also described in details. The text deals with the implementation and evaluation of these processes during the
- PDF / 4,139,818 Bytes
- 128 Pages / 453.543 x 683.15 pts Page_size
- 74 Downloads / 200 Views
toring and Evaluation of Production Processes An Analysis of the Automotive Industry
Monitoring and Evaluation of Production Processes
Anton Panda Jozef Jurko Iveta Pandová •
Monitoring and Evaluation of Production Processes An Analysis of the Automotive Industry
123
Anton Panda Faculty of Manufacturing Technologies Technical University of Košice with seat in Prešov Slovakia
Iveta Pandová Faculty of Manufacturing Technologies Technical University of Košice with seat in Prešov Slovakia
Jozef Jurko Faculty of Manufacturing Technologies Technical University of Košice with seat in Prešov Slovakia
ISBN 978-3-319-29441-4 DOI 10.1007/978-3-319-29442-1
ISBN 978-3-319-29442-1
(eBook)
Library of Congress Control Number: 2016932351 © Springer International Publishing Switzerland 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG Switzerland
The authors express gratitude to the reviewers whose valuable and substantive suggestions and observations have raised the overall level and quality of this publication. Reviewers: Dr.h.c. Prof. Dr.hab.Inž. Tadeusz Zaborowski Prof. Ing. Jozef Pilc, CSc. Prof. Dr. Ing. Ivan Mrkvica Ing. Ján Katuščák
Contents
1
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
Statement of the Goals of This Work . . . . . . . . . . . . . . . . . . . . . .
3
3
Analysis of the Current State of the Regulation of Manufacturing Processes . . . . . . . . . . . . . . . . 3.1 State of the Problem in Slovakia and Abroad. 3.1.1 State of the Problem in Slovakia . . . 3.1.2 State of the Problem Abroad . . . . . . 3.2 Development Trends. . . . . . . . . . . . . . . . . .
. . . . .
5 8 8 9 9
... ...
11 14
...
15
...
16
... ...
16 24
...
25
...
25
... ...
25 26
4
5
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
.
Data Loading...
