Reliable automatic classification and segmentation of laser point clouds by statistical analysis of surface curvature va
- PDF / 898,113 Bytes
- 14 Pages / 595.276 x 790.866 pts Page_size
- 5 Downloads / 163 Views
ORIGINAL PAPER
Reliable automatic classification and segmentation of laser point clouds by statistical analysis of surface curvature values Fabio Crosilla & Domenico Visintini & Francesco Sepic
Received: 16 September 2008 / Accepted: 9 March 2009 / Published online: 7 April 2009 # Società Italiana di Fotogrammetria e Topografia (SIFET) 2009
Abstract Dealing with a procedure for the automatic classification of laser point clouds based on surface curvature values, one of the most critical aspects is the correct interpretation of the estimated results. This care is required since the measurements are characterised by errors of different kind, and simplified analytical models are applied to estimate the differential terms used to locally compute the object surface curvature values. Following a non-parametric approach, the differential terms are the firstand second-order partial derivatives of a Taylor’s expansion used to determine the Gaussian K and the mean H local curvatures. Therefore, a statistical analysis is proposed in this paper. It is based at first on a chi-square test applied to verify the fulfilment of the second-order Taylor’s expansion. Successively, the variance–covariance propagation law is applied to the estimated differential terms, in order to calculate the covariance matrix of a two-row vector containing the Gaussian and the mean curvature estimates, and an F ratio test is then applied to verify their significance. By analysing the test acceptance or rejection for K and H and their sign, a reliable classification of the whole point cloud into its geometrical basic types is carried out. A robust parametric modelling is then applied to estimate the analytical function of each classified surface. F. Crosilla (*) : D. Visintini : F. Sepic Department of Georesources & Territory, University of Udine, via Cotonificio 114, 33100 Udine, Italy e-mail: [email protected] URL: http://geomatica.uniud.it D. Visintini e-mail: [email protected] F. Sepic e-mail: [email protected]
This parametric modelling allows also the indirect segmentation of the geometrical units. Nevertheless, to directly perform the unit segmentation by detecting the discontinuity lines, an extension of the Taylor’s expansion to the third- and fourth-order terms is also suggested. Some numerical experiments on noisy synthetic laser data confirm the validity of the method proposed. Keywords Laser scanning . Classification . Feature recognition . Statistical analysis . Spatial modelling
Introduction As well known, laser-scanning survey is characterised by a fully automatic point clouds acquisition method, while the successive processing phases of registration, classification and segmentation require some levels of human intervention. To furnish a contribution in the direction of a fully automatic laser data processing, a new reliable geometrical classification of the point clouds is proposed in this paper. The work fits in the recent researches conducted by the authors, whose analytical aspects have been mainly present
Data Loading...