Report of the Workshop Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing (WAM
The volume focuses on theoretical and computational approaches and involves areas such as simulation-based engineering and science, integrated computational materials engineering, mechanics, material science, manufacturing processes, and other specialized
- PDF / 3,146,326 Bytes
- 94 Pages / 439.37 x 666.142 pts Page_size
- 33 Downloads / 150 Views
Xu Guo Gengdong Cheng Wing-Kam Liu
Report of the Workshop Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing (WAM 2016) 123
SpringerBriefs in Applied Sciences and Technology Series editor Janusz Kacprzyk, Polish Academy of Sciences, Systems Research Institute, Warsaw, Poland
SpringerBriefs present concise summaries of cutting-edge research and practical applications across a wide spectrum of fields. Featuring compact volumes of 50– 125 pages, the series covers a range of content from professional to academic. Typical publications can be: • A timely report of state-of-the art methods • An introduction to or a manual for the application of mathematical or computer techniques • A bridge between new research results, as published in journal articles • A snapshot of a hot or emerging topic • An in-depth case study • A presentation of core concepts that students must understand in order to make independent contributions SpringerBriefs are characterized by fast, global electronic dissemination, standard publishing contracts, standardized manuscript preparation and formatting guidelines, and expedited production schedules. On the one hand, SpringerBriefs in Applied Sciences and Technology are devoted to the publication of fundamentals and applications within the different classical engineering disciplines as well as in interdisciplinary fields that recently emerged between these areas. On the other hand, as the boundary separating fundamental research and applied technology is more and more dissolving, this series is particularly open to trans-disciplinary topics between fundamental science and engineering. Indexed by EI-Compendex and Springerlink.
More information about this series at http://www.springer.com/series/8884
Xu Guo Gengdong Cheng Wing-Kam Liu •
Report of the Workshop Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing (WAM 2016)
123
Xu Guo Department of Engineering Mechanics Dalian University of Technology Dalian China
Wing-Kam Liu Department of Mechanical Engineering Northwestern University Evanston, IL USA
Gengdong Cheng Department of Engineering Mechanics Dalian University of Technology Dalian China
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISBN 978-3-319-63669-6 ISBN 978-3-319-63670-2 (eBook) https://doi.org/10.1007/978-3-319-63670-2 Library of Congress Control Number: 2017953783 © The Author(s) 2018 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication doe
Data Loading...
