Routine Data Processing in Earthquake Seismology With Sample Data, E
The purpose of this book is to get a practical understanding of the most common processing techniques in earthquake seismology. The book deals with manual methods and computer assisted methods. Each topic will be introduced with the basic theory foll
- PDF / 13,211,960 Bytes
- 350 Pages / 439.37 x 666.142 pts Page_size
- 49 Downloads / 205 Views
Routine Data Processing in Earthquake Seismology With Sample Data, Exercises and Software
Jens Havskov · Lars Ottemöller Department of Earth Science University of Bergen, Norway
123
Jens Havskov Department of Earth Science University of Bergen Allegaten 41 5007 Bergen Norway [email protected]
Lars Ottemöller Department of Earth Science University of Bergen Allegaten 41 5007 Bergen Norway [email protected]
Exercises, test data and public domain software (SEISAN) can be downloaded from http://extras.springer.com ISBN 978-90-481-8696-9 e-ISBN 978-90-481-8697-6 DOI 10.1007/978-90-481-8697-6 Springer Dordrecht Heidelberg London New York Library of Congress Control Number: 2010923101 © Springer Science+Business Media B.V. 2010 No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording or otherwise, without written permission from the Publisher, with the exception of any material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Cover illustration: The illustration is based on the results shown in Figure 7.38. The fault plane solution and seismograms are from an earthquake in California on 12 August 1998 at 14:10. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface
The purpose of this book is to provide a practical description of the most common processing techniques in earthquake seismology. The book will deal with manual methods and computer assisted methods. The idea is that each topic will be introduced with the basic theory followed by practical examples and exercises. There will be manual exercises entirely based on the printed material of the book, as well as computer exercises based on public domain software. However, most exercises are computer based. The software used, as well as all test data will also be available via http://extras.springer.com. This book is intended for everyone processing earthquake data, both in the observatory routine and in connection with research. Using the exercises, the book can also be used as basis for a university course in earthquake processing. Since the main emphasis is on processing, the theory will be dealt with to the extent needed to understand the processing steps, however references will be given to where more extensive explanation can be found. Currently there is one extensive book dealing with, among other topics, earthquake data processing. This is the “New Manual of Seismological Observatory Practice” (NMSOP) written by many authors (including the authors of this book) and edited by Peter Bormann (2002). The complete manual is available at www.seismo.com/msop/msop_intro.html. NMSOP provides the most extensive background for our book and the intention is to build on NMSOP. In signal processing, the most extensive work is the “Of poles and zeros” by Scherbaum (2001) while the instrumental asp
Data Loading...
