Recommendations for Fatigue Design of Welded Joints and Components
This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes.
- PDF / 4,342,014 Bytes
- 150 Pages / 453.543 x 683.15 pts Page_size
- 76 Downloads / 530 Views
A.F. Hobbacher
Recommendations for Fatigue Design of Welded Joints and Components Second Edition
IIW Collection Series editor Cécile Mayer, Villepinte, France
About the Series The IIW Collection of Books is authored by experts from the 59 countries participating in the work of the 23 Technical Working Units of the International Institute of Welding, recognized as the largest worldwide network for welding and allied joining technologies. The IIW’s Mission is to operate as the global body for the science and application of joining technology, providing a forum for networking and knowledge exchange among scientists, researchers and industry. Published books, Best Practices, Recommendations or Guidelines are the outcome of collaborative work and technical discussions-they are truly validated by the IIW groups of experts in joining, cutting and surface treatment of metallic and non-metallic materials by such processes as welding, brazing, soldering, thermal cutting, thermal spraying, adhesive bonding and microjoining. IIW work also embraces allied fields including quality assurance, non-destructive testing, standardization, inspection, health and safety, education, training, qualification, design and fabrication.
More information about this series at http://www.springer.com/series/13906
A.F. Hobbacher
Recommendations for Fatigue Design of Welded Joints and Components Second Edition IIW document IIW-2259-15 ex XIII-2460-13/XV-1440-13 This document is a revision of XIII-2151r4-07/XV-1254r4-07
123
A.F. Hobbacher University of Applied Sciences Wilhelmshaven Germany
1st edition: “Fatigue Design of Welded Joints and Components: Recommendations of IIW Joint Working Group XIII–XV”, Crc Press, 1996, ISBN: 978-1855733152 ISSN 2365-435X IIW Collection ISBN 978-3-319-23756-5 DOI 10.1007/978-3-319-23757-2
ISSN 2365-4368
(electronic)
ISBN 978-3-319-23757-2
(eBook)
Library of Congress Control Number: 2015950054 Springer Cham Heidelberg New York Dordrecht London © International Institute of Welding 1996 © Springer International Publishing Switzerland 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty,
Data Loading...
