Risk and Failure Analysis for Improved Performance and Reliability
The Army Materials and Mechanics Research Center of Water town, Massachusetts in cooperation with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has conducted the Sagamore Army Materials
- PDF / 30,508,269 Bytes
- 357 Pages / 504.567 x 720 pts Page_size
- 17 Downloads / 193 Views
SAGAMORE ARMY MATERIALS RESEARCH CONFERENCE PROCEEDINGS A vailable from Plenum Press 9th: Fundamentals of Deformation Processing
Edited by Walter A. Backofen, John J. Burke, Louis F. Coffin, Jr., Norman L. Reed, and Volker Weiss
10th: Fatigue: An Interdisciplinary Approach Edited by John J. Burke, Norman L. Reed, and Volker Weiss
12th: Strengthening Mechanisms: Metals and Ceramics Edited by John J. Burke, Norman L. Reed, and Volker Weiss
13th: Surfaces and Interfaces I: Chemical and Physical Characteristics Edited by John J. Burke, Norman L. Reed, and Volker Weiss
14th: Surfaces and Interfaces II: Physical and Mechanical Properties Edited by John J. Burke, Norman L. Reed, and Volker Weiss
15th: Ultrarme-Grain Ceramics Edited by John J. Burke, Norman L. Reed, and Volker Weiss
16th: Ultrafine-Grain Metals Edited by John J. Burke and Volker Weiss
17th: Shock Waves Edited by John J. Burke and Volker Weiss
18th: Powder Metallurgy for High-Performance Applications Edited by John J. Burke and Volker Weiss
19th: Block and Graft Copolymers Edited by John J. Burke and Volker Weiss
20th: Characterization of Materials in Research: Ceramics and Polymers Edited by John J. Burke and Volker Weiss
21st:
Advances in Deformation Processing Edited by John J. Burke and Volker Weiss
22nd: Application of Fracture Mechanics to Design Edited by John J. Burke and Volker Weiss
23rd:
Nondestructive Evaluation of Materials Edited by John J. Burke and Volker Weiss
24th:
Risk and Failure Analysis for Improved Performance and Reliability Edited by John J. Burke and Volker Weiss
Risk and Failure Analgslsu IlIIpIlJ\ed Pemrmance and ReIlablllty Edited by
John J.Burke
Army Materials and Mechanics Research Center Watertown, Massachusetts
and
Volker Weiss Syracuse University Syracuse, New York
PLENUM PRESS • NEW YORK AND LONDON
Library of Congress Cataloging in Publication Data Sagamore Army Materials Research Conference, 24th, Raquette Lake, N.Y., 1977. Risk and failure analysis for improved performance and reliability. Includes index. 1. Materials- Testing-Congresses. 2. Reliability (Engineering)-Congresses. 3. Munitions-Materials-Testing-Congresses. I. Burke JohnJ. II. Weiss, Volker, 1930III. Title. 620.11 80-12346 TA41O.S17 1977 ISBN 978-1-4684-7813-6 ISBN 978-1-4684-7811-2 (eBook) DOI 10.1007/978-1-4684-7811-2
Proceedings of the Twenty-fourth Sagamore Army Materials Research Conference on Risk and Failure Analysis for Improved Performance and Reliability, held at Bolton Landing, Lake George, New York, August 21-26,1977. © 1980 Plenum Press, New York Softcover reprint of the hardcover 1st edition 1980 A Division of Plenum Publishing Corporation 227 West 17th Street, New York, N.Y. 100ll
All rights reserved No part of this book may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, microfilming, recording, or otherwise, without written permission from the Publisher
SAGAMORE CONFERENCE COMMITTEE Chairman
JOHN J. BURKE Army Materials and Mecha
