Rubber Nano Blends Preparation, Characterization and Applications
This book summarizes the preparation, characterization and applications of rubber based nano blends. Rubbers from natural and synthetic polymers and their blends are discussed in the individual chapters, including nitrile, polyurethane, chlorosulphonated,
- PDF / 11,338,308 Bytes
- 350 Pages / 453.543 x 683.15 pts Page_size
- 69 Downloads / 219 Views
Gordana Marković Visakh P.M. Editors
Rubber Nano Blends Preparation, Characterization and Applications
Springer Series on Polymer and Composite Materials Series editor Susheel Kalia, Dehradun, India
More information about this series at http://www.springer.com/series/13173
Gordana Marković Visakh P.M. •
Editors
Rubber Nano Blends Preparation, Characterization and Applications
123
Editors Gordana Marković Technical Rubber Good Pirot Serbia
Visakh P.M. Department of Ecology and Basic Safety Tomsk Polytechnic University Tomsk Russia
ISSN 2364-1878 ISSN 2364-1886 (electronic) Springer Series on Polymer and Composite Materials ISBN 978-3-319-48718-2 ISBN 978-3-319-48720-5 (eBook) DOI 10.1007/978-3-319-48720-5 Library of Congress Control Number: 2016955688 © Springer International Publishing AG 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Contents
1 Rubber Nanoblends: State of the Art, New Challenges, and Opportunities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Visakh P.M. 2 Natural Rubber Nanoblends: Preparation, Characterization and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oriparambil Sivaraman Nirmal Ghosh, S. Gayathri, P. Sudhakara, S.K. Misra and J. Jayaramudu
1
15
3 Nitrile Rubber Latex Blends: Preparation, Characterization and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Garry L. Rempel and Hui Wang
67
4 Polyurethane Rubber-Based Nanoblends: Preparation, Characterization and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zizi I. Abdeen
89
5 Chlorosulfonated Rubber-Based Nanoblends: Preparation, Characterization and Applications . . . . . . . . . . . . . . . . . .
Data Loading...
