Shear Forces and Bending Moments

Figure shows a simple beam, one of the widely used statically determinate beams loaded with a central point load W.

  • PDF / 23,765,259 Bytes
  • 923 Pages / 609.449 x 807.874 pts Page_size
  • 48 Downloads / 379 Views

DOWNLOAD

REPORT


Strength of Materials 4th Edition

Strength of Materials

D. K. Singh

Strength of Materials Fourth Edition

123

D. K. Singh Department of Mechanical Engineering Netaji Subhas University of Technology New Delhi, Delhi, India

ISBN 978-3-030-59666-8 ISBN 978-3-030-59667-5 https://doi.org/10.1007/978-3-030-59667-5

(eBook)

Jointly published with Ane Books Pvt. Ltd. In addition to this printed edition, there is a local printed edition of this work available via Ane Books in South Asia (India, Pakistan, Sri Lanka, Bangladesh, Nepal and Bhutan) and Africa (all countries in the African subcontinent). ISBN of the Co-Publisher’s edition: 9789385462061 1st–4th editions: © The Author(s) 2007, 2009, 2013, 2021 This work is subject to copyright. All rights are reserved by the Publishers, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publishers, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publishers nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publishers remain neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland

&GFKECVGF VQO[ RCTGPVU

Preface to the Fourth Edition

The fourth edition of the book is presented before you. The new edition includes four new chapters and has increased by about 300 pages. Now the book covers the subject in totality and takes care of both the basics and the advanced topics of the strength of materials. Besides including four new chapters, three existing chapters have been rewritten to make them more relevant and meaningful. This has further increased the scope of the book. I thankfully acknowledge the support and encouragement from two of my best ever friends, Jai Shankar and Shakil Ahmad. My parents and in-laws especially Babuji and Mummi are gratefully remembered for their blessings. My lovely wife Alka and daughters Shivangi and Shalvi deserve special mention for giving their affectionate support that keeps me always elevated and in high spirit. Finally, I appreciate the response from the readers of the book, which has