Synthetic Polymeric Membranes Characterization by Atomic Force Micro
Tis book concentrates on atomic force microscopy (AFM), a method recently - veloped to study the surfaces of synthetic polymeric membranes. AFM is becoming a very important tool for the characterization of synthetic polymeric membranes. Te development of
- PDF / 5,346,036 Bytes
- 207 Pages / 439.37 x 666.142 pts Page_size
- 51 Downloads / 217 Views
Springer Laboratory Manuals in Polymer Science Pasch, Trathnigg: HPLC of Polymers ISBN: 3-540-61689-6 (hardcover) ISBN: 3-540-65551-4 (softcover) Mori, Barth: Size Exclusion Chromatography ISBN: 3-540-65635-9 Pasch, Schrepp: MALDI-TOF Mass Spectrometry of Synthetic Polymers ISBN: 3-540-44259-6 Kulicke, Clasen: Viscosimetry of Polymers and Polyelectrolytes ISBN: 3-540-40760-X Hatada, Kitayama: NMR Spectroscopy of Polymers ISBN: 3-540-40220-9 Brummer, R.: Rheology Essentials of Cosmetics and Food Emulsions ISBN: 3-540-25553-2 Mächtle, W., Börger, L.: Analytical Ultracentrifugation of Polymers and Nanoparticles ISBN: 3-540-23432-2 Heinze, T., Liebert, T., Koschella, A.: Esterification of Polysaccharides ISBN: 3-540-32103-9 Koetz, J., Kosmella, S.: Polyelectrolytes and Nanoparticles ISBN: 3-540-46381-X Striebeck, N.: X-Ray Scattering of Soft Matter ISBN: 3-540-69855-5 Schärtl, W.: Light Scattering from Polymer Solutions and Nanoparticle Dispersions ISBN: 3-540-71950-2 Khulbe, K.C., Feng, C.Y., Matsuura, T.: Synthetic Polymeric Membranes ISBN: 3-540-73993-7
Kailash C. Khulbe ċ C.Y. Feng ċ Takeshi Matsuura
Synthetic Polymeric Membranes Characterization by Atomic Force Microscopy
123
Dr. Kailash C. Khulbe C.Y. Feng Dr. Takeshi Matsuura Industrial Membrane Research Laboratory Chemical Engineering Department University of Ottawa Louis Pasteur St. 161 Ottawa, K1N 6N5 Canada [email protected] [email protected] [email protected]
ISBN 978-3-540-73993-7
e-ISBN 978-3-540-73994-4
DOI 10.1007/978-3-540-73994-4 Library of Congress Control Number: 2007931849 © 2008 Springer-Verlag Berlin Heidelberg This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: WMXDesign GmbH, Heidelberg, Germany Typesetting and production: LE-TEX Jelonek, Schmidt & Vöckler GbR, Leipzig, Germany Printed on acid-free paper 987654321 springer.com
Springer Laboratory Manuals in Polymer Science
Editor Priv.-Doz. Dr. Harald Pasch Deutsches Kunststoff-Institut Abt. Analytik Schloßgartenstr. 6 64289 Darmstadt Germany e-mail: [email protected]
Editorial Board PD Dr. Ingo Alig Deutsches Kunststoff-Institut Abt. Physik Schloßgartenstr. 6 64289 Darmstadt Germany email: [email protected] Prof. Josef Janca Université de La Rochelle
Data Loading...
