Two-Photon Polymerisation 3D Printing of Microneedle Array Templates with Versatile Designs: Application in the Developm
- PDF / 4,077,789 Bytes
- 15 Pages / 595.276 x 790.866 pts Page_size
- 101 Downloads / 165 Views
RESEARCH PAPER
Two-Photon Polymerisation 3D Printing of Microneedle Array Te m p l a t e s w i t h Ve r s a t i l e D e s i g n s : A p p l i c a t i o n in the Development of Polymeric Drug Delivery Systems Ana Sara Cordeiro 1 & Ismaiel A. Tekko 1,2 & Mohamed H. Jomaa 3 & Lalitkumar Vora 1 & Emma McAlister 1 & Fabiana Volpe-Zanutto 1 & Matthew Nethery 1 & Paul T. Baine 3 & Neil Mitchell 3 & David W. McNeill 3 & Ryan F. Donnelly 1 Received: 3 June 2020 / Accepted: 20 July 2020 # The Author(s) 2020
ABSTRACT Purpose To apply a simple and flexible manufacturing technique, two-photon polymerisation (2PP), to the fabrication of microneedle (MN) array templates with high precision and low cost in a short time. Methods Seven different MN array templates were produced by 2PP 3D printing, varying needle height (900–1300 μm), shape (conical, pyramidal, cross-shaped and with pedestal), base width (300–500 μm) and interspacing (100–500 μm). Silicone MN array moulds were fabricated from these templates and used to produce dissolving and hydrogel-forming MN arrays. These polymeric MN arrays were evaluated for their insertion in skin models and their ability to deliver model drugs (cabotegravir sodium and ibuprofen sodium) to viable layers of the skin (ex vivo and in vitro) for subsequent controlled release and/or absorption. Results The various templates obtained with 2PP 3D printing allowed the reproducible fabrication of multiple MN array moulds. The polymeric MN arrays produced were efficiently inserted into two different skin models, with sharp conical and pyramidal needles showing the highest insertion depth values (64–90% of needle height). These results correlated generally with ex vivo and in vitro drug delivery results, where the same
Electronic supplementary material The online version of this article (https://doi.org/10.1007/s11095-020-02887-9) contains supplementary material, which is available to authorized users. * Ryan F. Donnelly [email protected] 1
School of Pharmacy, Queen’s University Belfast, Belfast, UK
2
Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmacy, Aleppo University, Aleppo, Syria
3
School of Electronics, Electrical Engineering and Computer Science, Queen’s University Belfast, Belfast, UK
designs showed higher drug delivery rates after 24 h of application. Conclusion This work highlights the benefits of using 2PP 3D printing to prototype variable MN array designs in a simple and reproducible manner, for their application in drug delivery.
KEY WORDS 3D printing . dissolving . hydrogel-forming . microneedle array . two-photon polymerisation
INTRODUCTION The use of microneedle (MN) arrays to overcome the limitations of conventional drug delivery has become a growing research field in the past decades. These minimally invasive structures, usually comprising multiple micron-sized needles, have shown abilities to deliver a variety of molecules and nanoparticles, for therapeutic and vaccination purposes (1,2). Furthermore, these innovative devices can also be used t
Data Loading...
