Ultrafine-Grain Ceramics
The Army Materials and Mechanics Research Center has conducted the Saga more Army Materials Research Conferences, in cooperation with the Metallurgi cal Research Laboratories of the Department of Chemical Engineering and Metallurgy of Syracuse Universit
- PDF / 36,806,656 Bytes
- 400 Pages / 430.866 x 649.134 pts Page_size
- 17 Downloads / 214 Views
SAGAMORE ARMY MATERIALS RESEARCH CONFERENCE PROCEEDINGS Published by Syracuse University Press
Fundamentals of Deformation Processing eds., Walter A. Backofen and others (9th Proceeding) Fatigue-An Interdisciplinary Approach eds., John J. Burke, Norman L. Reed, and Volker Weiss (lOth Proceeding) Strengthening Mechanisms-Metals and Ceramics eds., John J. Burke, Norman L. Reed, and Volker Weiss (12th Proceeding) Surfaces and Interfaces I Chemical and Physical Characteristics eds., John J. Burke, Norman L. Reed, and Volker Weiss (13th Proceeding) Surfaces and Interfaces II Physical and Mechanical Properties eds., John J. Burke, Norman L. Reed, and Volker Weiss (14th Proceeding)
Ultrafine-Grain Ceramics • • • • • • • EDITORS
JOHN J. BURKE Staff Scientist, Army Materials and Mechanics Research Center
NORMAN L. REED Associate Director, Army Materials and Mechanics Research Center
VOLKER WEISS Professor, Syracuse University
Proceedings of the 15th Sagamore Army Materials Research Conference. Held at Sagamore Conference Center, Raquette Lake, New York, August 20-23. 1968. Sponsored by Army Materials and Mechanics Research Center, Watertown, Mass., in cooperation with Syracuse University. Organized and directed by Army Materials and Mechanics Research Center in cooperation with Syracuse University.
SYRACUSE UNIVERSITY PRESS
Copyright © 1970 Softcover reprint of the hardcover 1st edition 1970
by Syracuse University Press Syracuse, New York First Edition All Rights Reserved
Standard Book Number 8156-5026-4 Library of Congress Catalog Card Number: 64-12568
ISBN-13: 978-1-4684-2645-8 e-ISBN-13: 978-1-4684-2643-4 DOl: 10.1007/978-1-4684-2643-4
Sagamore Conference Committee Chairman Norman L. Reed, Army Materials and Mechanics Research Center
Vice Chairman John J. Burke, Army Materials and Mechanics Research Center
Program Director Volker Weiss, Syracuse University
Program Coordinator Robert J. Sell, Syracuse University
Program Committee Irving Berman, Army Materials and Mechanics Research Center Capt. Stuart L. Blank, Army Materials and Mechanics Research Center John J. Burke, Army Materials and Mechanics Research Center H. M. Davis, U. S. Army Research Office Alexis G. Pincus, lIT Research Institute Norman L. Reed, Army Materials and Mechanics Research Center Richard M. Spriggs, Lehigh University
Arrangements at Sagamore Conference Center Richard A. Jones, Syracuse University
Foreword The Army Materials and Mechanics Research Center has conducted the Sagamore Army Materials Research Conferences, in cooperation with the Metallurgical Research Laboratories of the Department of Chemical Engineering and Metallurgy of Syracuse University, since 1954. The purpose of the conferences has been to gather together scientists and engineers from academic institutions, industry, and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific community. Grain size and its control is a major factor governing the behavior of materials. Knowled
