• PDF / 408,927 Bytes
• 8 Pages / 386.64 x 620.1 pts Page_size
• 13 Downloads / 137 Views

DOWNLOAD

REPORT

solution layer on the surface of the copper electrode and an AC impedance technique was used to measure the in-situ corrosion rate of the copper RDE. MODELING OF GENERAL CORROSION OF COPPER Nishikata et al. clarified the anodic dissolution process in NaCI-NaHC0 3 /Na2 CO 3 solution at pH

Recommend Documents

Theoretical Modeling of Crevice and Pitting Corrosion Processes in Relation to Corrosion of Radioactive Waste Containers

159 67 487KB

Stochastic Modeling of the Influence of Environment on Pitting Corrosion Damage of Radioactive-Waste Containers

164 10 437KB

Performance Assessment of Geological Disposal of High-level Radioactive Waste in a Plastic Clay formation

203 59 128KB

Geological Disposal of Carbon Dioxide and Radioactive Waste: A Comparative Assessment

163 113 16MB

A Model for Predicting the Temperature Distribution Around Radioactive Waste Containers in Very Deep Geological Borehole

192 7 454KB

Effect of Overpack Materials on Glass Leaching in Geological Burial

180 107 2MB

Geopolymers for the Immobilization of Radioactive Waste

215 87 290KB

Creation of system of final isolation (disposal) of radioactive waste in the Russian Federation

201 81 524KB

Use of Fly-Ash for Sealing a Radioactive Waste Repository

191 76 370KB

Long-Term Corrosion of Zircaloy Hull Waste under Geological Disposal Conditions: Corrosion Correlations, Factors Influen

194 90 395KB

Corrosion Processes Affecting the Performance of Alloy 22 as a High-Level Radioactive Waste Container Material

166 49 199KB

Corrosion of Copper Nuclear Waste Containers in Aqueous Sulphide Solutions

182 21 200KB