Advances in Manufacturing II Volume 5 - Metrology and Measurement Sy
This book gathers timely contributions on metrology and measurement systems, across different disciplines and field of applications. The chapters, which were presented at the 6th International Scientific-Technical Conference, MANUFACTURING 2019, held on M
- PDF / 83,149,750 Bytes
- 313 Pages / 439.371 x 666.143 pts Page_size
- 98 Downloads / 216 Views
Magdalena Diering Michał Wieczorowski Christopher A. Brown Editors
Advances in Manufacturing II Volume 5 - Metrology and Measurement Systems
Lecture Notes in Mechanical Engineering
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor in your country: China: Li Shen at [email protected] India: Dr. Akash Chakraborty at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.
More information about this series at http://www.springer.com/series/11236
Magdalena Diering Michał Wieczorowski Christopher A. Brown •
•
Editors
Advances in Manufacturing II Volume 5 - Metrology and Measurement Systems
123
Editors Magdalena Diering Poznan University of Technology Poznan, Poland
Michał Wieczorowski Poznan University of Technology Poznan, Poland
Christopher A. Brown Worcester Polytechnic Institute Worcester, MA, USA
ISSN 2195-4356 ISSN 2195-4364 (electronic) Lecture Notes in Mechanical Engineering ISBN 978-3-030-18681-4 ISBN 978-3-030-18682-1 (eBook) https://doi.org/10.1007/978-3-030-18682-1 © Springer Nature Switzerland AG 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevan
