An Investigation of the Viscous Flow Problem Associated with the Heating of the Glass Preform During Optical Fiber Proce
- PDF / 1,738,299 Bytes
- 6 Pages / 414.72 x 648 pts Page_size
- 5 Downloads / 171 Views
*
Author to whom correspondence should be addressed. 209 Mat. Res. Soc. Symp. Proc. Vol. 321. ©1994 Materials Research Society
drawing process by implementing a feedback control loop. A particle tracking method to model 27 axisymmetric die swell for flow through a jet was presented by Caswell and ViriyayuthakoM. 28 29 30 2 3t Manfr6, Brown, Geyling, Glicksman, and Kase and Matsuo performed a onedimensional analysis referring to the fiber formation from glass flowing through a nozzle rather than from a preform in a furnace. Manfr6 28 concentrated on the forces affecting this fiber drawing process in one dimension. Geyling 30 started his study with a two-dimensional model that he later reduced to a one-dimensional one by simplifying with the small slope assumption that IdR/dzl
Data Loading...
