COMADEM 89 International Proceedings of the First International Cong
RajB KNRao Conference Director, Birmingham Polytechnic Condition Monitoring and Diagnostic Engineering Management (COMADEM) is a relatively new field that has already made its mark in a wide range of industries. But all the signs are that even more will b
- PDF / 43,247,111 Bytes
- 558 Pages / 439.37 x 666.142 pts Page_size
- 21 Downloads / 190 Views
International
II
COMADEM89 II
International II
Proceedings of the First International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM)
Organised by Birmingham Polytechnic, 4 to 6 September 1989 Co-sponsoring Organisations The British Institute of NDT The Institute of Measurement & Control The Institution of Electrical Engineers The Institute of Acoustics The British Society for Strain Management The Safety & Reliability Society The Institution of Diagnostic Engineers Shells Thornton's Research Centre Lucas Engineering & Systems Ltd The Society of Environmental Engineers
Conference Director RajBKN Rao
Proceedings Editors RajBKN Rao ADHope
&
KOGAN PAGE
B K N Rao, A D Hope and contributors, 1989 All rights reserved. No reproduction, copy or transmission ofthis publication may be made without written permission. No paragraph of this publication may be reproduced, copied or transmitted save with written permission or in accordance with the provisions of the Copyright Act 1956 (as amended), or underthe terms of any licence permitting limited copying issued by the Copyright Licensing Agency, 7 Ridgmount Street, London WCIE7AE. Softcover reprint of the hardcover 1st edition 1956 Any person who does any unauthorised act in relation to this publication may be liable to criminal prosecution and civil claims for damages. First published in 1989 by Kogan Page Ltd, 120 Penton ville Road, London N 1 9JN
British Library Cataloguing in Publication Data
COMADEM International 89. Conference COMADEM International 89: proceedings ofthe First International Seminar on Condition Management and Diagnostic Engineering Management. 1. Manufacturing industries. Management I. Title II. Y. A. D. III. Rao, Raj B K N 658.5 ISBN 978-1-4684-8907-1 ISBN 978-1-4684-8905-7 (eBook) DOI 10.1007/978-1-4684-8905-7
Dedicated to Eng, Laxmi, Aruna
Acknowledgements
This international proceedings couldn't have been produced at such short notice without the total support, dedication, sacrifice and true professionalism that are displayed by all the authors representing various organisations from many parts of the world. We are indeed very grateful for their invaluble contributions. We are also grateful to Mr Piers Burnett and his efficient staff at Kogan Page for putting up with our excuses and for producing such high-quality workmanship in such a short time. Raj B K N Rao A D Hope
Contents
Introduction ................................................................................................... 13 RajBKNRao Key Note Lecture I Total Quality in NDTand Condition Monitoring ..................................................... 15 JMFarJey Key Note Lecture 2 Condition-based Maintenance - Where to Next? ..................................................... 20 D S T Rllubenheimer Key Note Lecture 3 Condition Monitoring in Manufacturing ................................................................ 25 DA L West
Machinery/Systems Health Monitoring Assessment of Symptom Limit Value in Vibration Condition Monito
