Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation us
- PDF / 303,337 Bytes
- 2 Pages / 595.276 x 790.866 pts Page_size
- 48 Downloads / 182 Views
CORRECTION
Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion Nitin Chandola 1 & Oana Cazacu 1
&
Benoit Revil-Baudard 1
# Springer-Verlag France SAS, part of Springer Nature 2019
Correction to: International Journal of Material Forming https://doi.org/10.1007/s12289-018-01465-0 In the original publication of this paper, an incorrect image of Figure 3 was used in error. Please see below for the correct image.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/ 10.1007/s12289-018-01465-0 * Oana Cazacu [email protected] 1
Department of Mechanical and Aerospace Engineering, University of Florida, REEF, 1350 N. Poquito Road, Shalimar, FL 32579, USA
Int J Mater Form Fig. 3 Predicted anisotropy in plastic properties: (a) variation of the yield stress ratios σ(α)/σ(0) and, (b) Lankford coefficients r(α) with respect to the angle α between the loading axis and the RD axis [100] in the {100}〈001〉 plane corresponding to: m2 =1.39, n1=2.42, n3 =0.37, n4 =6.8, c = 0.35 based on yield stress data for an Al 5% Cu single crystal reported in [26]
Data Loading...
