Design Methods for DSP Systems
- PDF / 253,220 Bytes
- 3 Pages / 600.03 x 792 pts Page_size
- 46 Downloads / 224 Views
Editorial Design Methods for DSP Systems Markus Rupp,1 Bernhard Wess,1 and Shuvra S. Bhattacharyya2 1 Institute
of Communications and Radio Frequency Engineering, Vienna University of Technology, Gusshausstrasse 25/389, 1040 Vienna, Austria 2 Department of Electrical & Computer Engineering, University of Maryland, College Park, MD 20742, USA Received 8 August 2005; Accepted 8 August 2005 Copyright © 2006 Markus Rupp et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Industrial implementations of DSP systems today require extreme complexity. Examples are wireless systems satisfying standards like WLAN or 3GPP, video components, or multimedia players. At the same time, often harsh constraints like low-power requirements burden the designer even more. Conventional methods for ASIC design are not sufficient any more to guarantee a fast conversion from initial concept to final product. In industry, the problem has been addressed by the wording design crisis or design gap. While this design gap exists in a complexity gap, that is, a difference between existing, available, and demanded complexity, there is also a productivity gap, that is, the difference between available complexity and how much we are able to efficiently convert into gate-level representations. This special issue intends to present recent solutions to such gaps addressing algorithmic design methods, algorithms for floating-to-fixed-point conversion, automatic DSP coding strategies, architectural exploration methods, hardware/software partitioning, as well as virtual and rapid prototyping. We received 20 submissions from different fields and areas of expertise from which finally only 12 were accepted for publication. These 12 papers can be categorised into four groups: pure VLSI design methods, prototyping methods, experimental reports on FPGAs, and floating-to-fixed-point conversions. Most activities in design methods are related to the final product. VLSI design methods intend to deal with high complexity in a rather short time. In this special issue, we present five contributions allowing to design complex VLSI designs in substantially lower time periods. In “Macrocell builder: IP-block-based design environment for high-throughput VLSI dedicated digital signal processing systems”, N.-E. Zergainoh et al. present a design tool, called DSP macrocell builder, that generates SystemC regis-
ter transfer level architectures for VLSI signal processing systems from high-level representations as interconnections of intellectual property (IP) blocks. The development emphasizes extensive parameterization and component reuse to improve productivity and flexibility. Careful generation of control structures is also performed to manage delays and coordinate parallel execution. Effectiveness of the tool is demonstrated on a number of high-throughput signal processing applications. In “Multiple-clock cycle a
Data Loading...
