Diamond-powered transistor performs in extreme environments
- PDF / 451,789 Bytes
- 2 Pages / 585 x 783 pts Page_size
- 67 Downloads / 228 Views
transistor performs in extreme environments
R
esearch is being conducted to employ wide-bandgap semiconductors such as SiC, GaN, and diamond to replace silicon to overcome its inherent limitations of high-frequency switching and power handling. Now researchers at the National Institute for Materials Science (NIMS) in Japan have designed a diamondpowered transistor that can be used in extreme environmental conditions like harsh temperatures and radiation
conditions, as reported in a recent issue of IEEE Electron Device Letters (doi:10.1109/LED.2017.2702744). Due to their high power frequency, thermal limits, and low power loss at high frequency, diamond-based electronic devices outshine other widebandgap semiconducting materialsbased devices. In this study, the researchers used a microwave plasma-enhanced chemical vapor deposition technique to grow a 150-nm-thick epitaxial layer of hydrogenated diamond (H-diamond) at 900– 940°C with a chamber pressure of 80 Torr. A 4-nm-thick layer of Al2O3 was selected as a buffer (to reduce the effect
of lattice mismatch) for the LaAlO3 to utilize H-diamond in enhancement-mode metal oxide semiconductor field-effect transistor (MOSFET) architecture, and a 30.4-nm-thick layer of Al2O3 was deposited on H-diamond for the operation of depletion-mode MOSFETs. Both types of devices were completed with Ti/Au metal deposition through e-beam evaporation. The schematic diagram of both circuits is shown in the Figure. An increase in gain maximum for the NOT logic circuit from 1.2 to 26.1 was recorded when the voltage supplied was changed from –5.0 to –25.0 V. The NOR logic circuit configuration showed immaculate NOR gate characteristics.
• VOLUME 42 • AUGUST 2017 • www.mrs.org/bulletin Downloaded MRS fromBULLETIN https://www.cambridge.org/core. IP address: 80.82.77.83, on 09 Sep 2017 at 11:45:42, subject to the Cambridge Core terms of use, available at https://www.cambridge.org/core/terms. https://doi.org/10.1557/mrs.2017.172
552
NEWS & ANALYSIS MATERIALS NEWS
CALL FOR PAPERS
b
Vin
Ground
Vin
Ground
a
VDD
VDD E-mode
Vout c
D-mode Vout
d
Vin1
E-mode
Vin1 D-mode
VDD Vout
Ground
Ground
According to Jiangwei Liu of NIMS, “The fabrication of logic circuits will push forward the development of diamond MOSFET current switches and digital circuits for high-temperature, high-power, high-frequency, energy-saving, and lowcarbon practical applications.” “Enhancement mode (normallyoff) is useful for diamond FET,” says Hiroshi Kawarada from Waseda University. According to Kawarada, the research team should move toward high-temperature operation and record the radiation hardness of circuits. He adds, “It is really useful for the safe dismantling of nuclear reactors and taking out the debris.” Yasuo Koide, vice president at NIMS, anticipates that these diamond-powered transistors will be commercialized for general applications in about 10 years. “However, in the limited field of radiation in the nuclear plant and space applications, the devices will be commercialized within five year
Data Loading...
