EUROMAT 2019 Symposia on Processing
- PDF / 430,973 Bytes
- 2 Pages / 593.972 x 792 pts Page_size
- 66 Downloads / 173 Views
JMEPEG (2020) 29:4831–4832 https://doi.org/10.1007/s11665-020-04972-x
GUEST EDITORIAL
Ivan Kaban
Pavel Protsenko
Anna Zervaki
Fabrizio Valenza
Christof Sommitsch
Simeon Agathopoulos
EUROMAT 2019 Symposia on Processing This issue of JMEP contains invited, peer-reviewed papers presented at the European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2019), held on September 1–5, 2019, in Stockholm, Sweden, in two symposia from the Area C ‘‘Processing’’: C6 ‘‘Joining,’’ organized by Anna Zervaki (University of Thessaly, Greece), Ivan Kaban (IFW Dresden, Germany), and C. Sommitsch (Technische Universita¨t Graz, Austria) C8 ‘‘Interface Design and Modelling, Wetting, and High-Temperature Capillarity,’’ organized by Pavel Protsenko (M.V. Lomonosov Moscow State University, Russian Federation), Fabrizio Valenza (CNR—ICMATE, Genoa, Italy), and Simeon Agathopoulos (University of Ioannina, Greece)
The research works in the field of joining technologies, presented at the C6 symposium, concerned soldering, brazing, diffusion bonding, resistance spot welding, friction stir welding, and riveting techniques. The symposium C8 covered research topics on grain boundary wetting, surface energy of liquid metals and interfacial phenomena, considering fundamental as well as applied issues related to materials joining, and interface design.
Journal of Materials Engineering and Performance
Volume 29(8) August 2020—4831
We wish to thank the authors for the written contributions and acknowledge the reviewers for their careful reading and evaluation of the manuscripts and valuable suggestions to improve the quality of the papers. We are grateful to the editor-in-chief of JMEP, Dr. Rajiv Asthana, and the ASM journal staff, including Mary Anne Fleming, senior content developer; Kate Doman, content developer (journals); and Vincent Katona, production coordinator; for the opportunity to publish the symposia contributions in this issue and for their professional and friendly support during the entire reviewing and publication process. We hope this collection will stimulate fresh thinking and promote further research on joining and interfacial phenomena. Ivan Kaban Leibniz Institute for Solid State and Materials Research Dresden, Germany Contact e-mail: [email protected] Anna Zervaki Department of Mechanical Engineering University of Thessaly Volos, Greece Christof Sommitsch Institute of Materials Science, Joining and Forming Technische Universita¨t Graz Graz, Austria Pavel Protsenko M.V. Lomonosov Moscow State University Moscow, Russian Federation Fabrizio Valenza National Research Council (CNR) – ICMATE Genoa, Italy Simeon Agathopoulos University of Ioannina Ioannina, Greece
Acknowledgments Open Access funding provided by Projekt DEAL.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, p
Data Loading...
