New Production Technologies in Aerospace Industry Proceedings of the
This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient m
- PDF / 8,199,737 Bytes
- 193 Pages / 453.543 x 683.15 pts Page_size
- 12 Downloads / 203 Views
Berend Denkena Editor
New Production Technologies in Aerospace Industry Proceedings of the 4th Machining Innovations Conference, Hannover, September 2013
Lecture Notes in Production Engineering
For further volumes: http://www.springer.com/series/10642
Berend Denkena Editor
New Production Technologies in Aerospace Industry Proceedings of the 4th Machining Innovations Conference, Hannover, September 2013
123
Editor Berend Denkena Institut für Fertigungstechnik und Werkzeugmaschinen Leibniz Universität Hannover Garbsen Germany
ISSN 2194-0525 ISBN 978-3-319-01963-5 DOI 10.1007/978-3-319-01964-2
ISSN 2194-0533 (electronic) ISBN 978-3-319-01964-2 (eBook)
Springer Cham Heidelberg New York Dordrecht London Library of Congress Control Number: 2013946936 Ó Springer International Publishing Switzerland 2014 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface
The aerospace industry is characterized by a high degree of research intensity and rapid developments. Due to this, aerospace industry has a high strategic importance in the development of innovative technologies. ‘‘The aerospace industry is one of the most successful industries in Europe, but also one of the most challenging,’’ says Hans-Joachim Peters, Chairman of the Machining Innovations Network e.V
Data Loading...
