Process Engineering Aspects in Bioleaching of Metals from Electronic Waste
Obsolete electronic devices and their components majorly contributed by the computer and mobile phone printed circuit boards (PCBs) constitute the electronic waste (e-waste). The e-wastes pose an environmental threat due to their eco-toxicological charact
- PDF / 434,172 Bytes
- 18 Pages / 439.37 x 666.142 pts Page_size
- 59 Downloads / 195 Views
Contents 1 E-Waste Management 2 Bioleaching of E-Waste for Metal Recovery 3 Process Engineering Aspects in Bioleaching 3.1 Biotic Factors Involved in Bioleaching 3.2 Abiotic Factors that Influence Bioleaching of E-Waste 3.3 Bioreactor Design and Its Operational Parameters 4 Conclusion References
Abstract Obsolete electronic devices and their components majorly contributed by the computer and mobile phone printed circuit boards (PCBs) constitute the electronic waste (e-waste). The e-wastes pose an environmental threat due to their eco-toxicological characteristics, thus making its management a mandate through an ecologically sustainable process. Further, the high concentration of metals in the e-waste makes it a secondary ore for metal recovery. Bioleaching is a bio-hydrometallurgical process, which is microbe-mediated dissolution of metals. Different nutritional classes of microorganisms like autotrophs and heterotrophs are active bioleaching agents of e-wastes. The mode of action of microbes for bioleaching of metals is obscure and is believed to ensue through redox reactions, protonic attack, or chelation. The process of bioleaching is influenced by biotic factors like the group and class of microorganism, growth rate, metabolic activity, etc. However, there are several abiotic factors that strongly affect the bioleaching efficiency. Development of a bioleaching process would need the study of various biological, nutritional, and engineering factors that influence the process. This chapter
M. Minimol, V. Shetty K (*), and M. B. Saidutta Department of Chemical Engineering, National Institute of Technology Karnataka Surathkal, Mangalore, India e-mail: [email protected]; [email protected] Manuel Jerold, Santhiagu Arockiasamy, and Velmurugan Sivasubramanian (eds.), Bioprocess Engineering for Bioremediation: Valorization and Management Techniques, Hdb Env Chem, DOI 10.1007/698_2020_575, © Springer Nature Switzerland AG 2020
M. Minimol et al.
presents the critical analysis of various process engineering aspects in the bioleaching of metals from e-waste. To engineer a bioleaching process, (1) various biological, nutritional, and physicochemical factors, such as media composition, pH, e-waste loading, particle size, oxygen requirement, inoculum size, etc., should be optimized and (2) suitable bioreactor choice considering the microbial type, phases to be contacted, and the pattern of contacting followed by optimization of bioreactor operational parameters. This paper brings out a critical review of these bioprocess engineering aspects in bioleaching of metals from e-waste, directing the reader to the future scope of research on bioleaching, a bioremediation strategy to save and conserve environment for sustainable development. Keywords Abiotic factors, Bioleaching, Bioreactors, Biotic factors, E-waste, Optimization
1 E-Waste Management Rapid evolution in the quality of living has imparted several technological innovations, especially in the use of electronic gadgets. Consequently, these gadgets have a short life
Data Loading...
