Advances in Design, Simulation and Manufacturing III Proceedings of
This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of sm
- PDF / 73,929,903 Bytes
- 588 Pages / 439.37 x 666.142 pts Page_size
- 45 Downloads / 241 Views
Vitalii Ivanov · Justyna Trojanowska · Ivan Pavlenko · Jozef Zajac · Dragan Peraković Editors
Advances in Design, Simulation and Manufacturing III Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9–12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering
Lecture Notes in Mechanical Engineering Series Editors Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Francesco Gherardini, Dipartimento Di Ingegneria, Edificio 25, Università Di Modena E Reggio Emilia, Modena, Modena, Italy Vitalii Ivanov, Department of Manufacturing Engineering Machine and Tools, Sumy State University, Sumy, Ukraine
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor of your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.
More information about this series at http://www.springer.com/series/11236
Vitalii Ivanov Justyna Trojanowska Ivan Pavlenko Jozef Zajac Dragan Peraković •
•
•
•
Editors
Advances in Design, Simulation and Manufacturing III Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9–12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering
123
Editors Vitalii Ivanov Sumy State University Sumy, Ukraine
Justyna Trojanowska Poznan University of Technology Poznan, Poland
