Computer Controlled Systems Analysis and Design with Process-orienta
Digital elements such as signal processors, microcontrollers or industrial PCs are widely used for filtering and control of continuous-time processes or plants. Because of the serial operation mode of these digital elements the continuous time processes
- PDF / 34,379,133 Bytes
- 487 Pages / 439 x 666 pts Page_size
- 25 Downloads / 226 Views
Springer
London Berlin Heidelberg New York Barcelona Hong Kong Milan Paris Singapore Tokyo
Published titles include: Markov Chains and Stochastic Stability
S.P. Meyn and R.L. Tweedie
Robust Control: Systems with Uncertain Physical Parameters
J. Ackermann in co-operation with A. Bartlett, D. Kaesbauer, W. Sienel and R. Steinhauser
Optimal Sampled-Data Control Systems Tongwen Chen and Bruce Francis
Nonlinear Control Systems (3rd edition) Alberto Isidori
Theory of Robot Control C. Canudas de Wit, B. Siciliano and G. Bastin (Eds)
Fundamental Limitations in Filtering and Control Maria M. Seron, Julio Braslavsky and Graham C. Goodwin
Constructive Nonlinear Control R. Sepulchre, M. Jankovic and P.V. Kokotovic
A Theory ofLearning and Generalization M. Vidyasagar
Adaptive Control LD. Landau, R. Lozano and M.M'Saad
Stabilization ofNonlinear Uncertain Systems Miroslav Krstic and Hua Deng
Passivity-based Control of Euler-Lagrange Systems Romeo Ortega, Antonio Loria, Per Johan Nicklasson and Hebertt Sira-Ramirez
Stability and Stabilization of Infinite Dimensional Systems with Applications Zheng-Hua Luo, Bao-Zhu Guo and Orner Morgul
Nonsmooth Mechanics (2nd edition) Bernard Brogliato
Nonlinear Control Systems II Alberto Isidori
LrGain and Passivity Techniques in Nonlinear Control Arjan van der Schaft
Control of Linear Systems with Regulation and Input Constraints Ali Saberi, Anton A. Stoorvogel and Peddapullaiah Sannuti
Robust and Hc:/J Control BenM. Chen
Efun N. Rossenwasser and Bernhard P. Lampe
Computer Controlled Systems Analysis and Design with Process-orientated Models With 111 Figures
,
Springer
Efim N. Rosenwasser, Prof Dr Department of Automatic Control, St Petersburg State Marine Technical University, St Petersburg, Russia Bernhard P. Lampe, Prof Dr University of Rostock, Institute of Automation, D-18051 Rostock, Germany
Series Editors B.D. Sontag. M. Thoma
ISSN 0178-5354 ISBN 1-85233-307-3 Springer-Verlag London Berlin Heidelberg British Library Cataloguing in Publication Data Rosenwasser, Efim N. Computer controlled systems: analysis and design with process· orientated models. - (Communications and control engineering) I.Automatic control I.Tide II.Lampe, Bernhard P. 629.8'95 ISBN 185233307-3 Library of Congress Cataloging-in-Publication Data A catalog record for this book is available from the Library of Congress Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers. © Springer-Verlag London Limited 2000
"MATLAB" and is the registered trademark of The MathWorks, Inc., http://www.mathworks.com.. The use of registered names,
