Coordinate Metrology Accuracy of Systems and Measurements
This book focuses on effective methods for assessing the accuracy of both coordinate measuring systems and coordinate measurements. It mainly reports on original research work conducted by Sladek’s team at Cracow University of Technology’s Laboratory of C
- PDF / 23,882,681 Bytes
- 472 Pages / 453.543 x 683.15 pts Page_size
- 49 Downloads / 281 Views
Jerzy A. Sładek
Coordinate Metrology Accuracy of Systems and Measurements
Springer Tracts in Mechanical Engineering Board of editors Seung-Bok Choi, Inha University, Incheon, South Korea Haibin Duan, Beijing University of Aeronautics and Astronautics, Beijing, P.R. China Yili Fu, Harbin Institute of Technology, Harbin, P.R. China Carlos Guardiola, Universitat Politècnica de València, València, Spain Jian-Qiao Sun, University of California, Merced, USA
About this Series Springer Tracts in Mechanical Engineering (STME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. The intent is to cover all the main branches of mechanical engineering, both theoretical and applied, including: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical structures and stress analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluids mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision engineering, Instrumentation, Measurement Materials Engineering Tribology and surface technology
Within the scopes of the series are monographs, professional books or graduate textbooks, edited volumes as well as outstanding Ph.D. theses and books purposely devoted to support education in mechanical engineering at graduate and postgraduate levels.
More information about this series at http://www.springer.com/series/11693
Jerzy A. Sładek
Coordinate Metrology Accuracy of Systems and Measurements
123
Prof. Jerzy A. Sładek Laboratory of Coordinate Metrology Cracow University of Technology Krakow Poland
ISSN 2195-9862 ISSN 2195-9870 (electronic) Springer Tracts in Mechanical Engineering ISBN 978-3-662-48463-0 ISBN 978-3-662-48465-4 (eBook) DOI 10.1007/978-3-662-48465-4 Library of Congress Control Number: 2015952527 Springer Heidelberg New York Dordrecht London © Springer-Verlag Berlin Heidelberg 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a
