Dry Gross Fretting of Rough Surfaces Influential Parameters
In this book, the authors present a comprehensive study of the effects of operating parameters (load, amplitude, frequency) on dry gross fretting of rough surfaces. It helps the reader to efficient surface preparations in order to monitor and reduce damag
- PDF / 4,491,085 Bytes
- 64 Pages / 439.371 x 666.143 pts Page_size
- 0 Downloads / 247 Views
Pawel Pawlus Andrzej Dzierwa Agnieszka Lenart
Dry Gross Fretting of Rough Surfaces Influential Parameters
SpringerBriefs in Applied Sciences and Technology Manufacturing and Surface Engineering
Series Editor Joao Paulo Davim, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
This series fosters information exchange and discussion on all aspects of manufacturing and surface engineering for modern industry. This series focuses on manufacturing with emphasis in machining and forming technologies, including traditional machining (turning, milling, drilling, etc.), non-traditional machining (EDM, USM, LAM, etc.), abrasive machining, hard part machining, high speed machining, high efficiency machining, micromachining, internet-based machining, metal casting, joining, powder metallurgy, extrusion, forging, rolling, drawing, sheet metal forming, microforming, hydroforming, thermoforming, incremental forming, plastics/composites processing, ceramic processing, hybrid processes (thermal, plasma, chemical and electrical energy assisted methods), etc. The manufacturability of all materials will be considered, including metals, polymers, ceramics, composites, biomaterials, nanomaterials, etc. The series covers the full range of surface engineering aspects such as surface metrology, surface integrity, contact mechanics, friction and wear, lubrication and lubricants, coatings an surface treatments, multiscale tribology including biomedical systems and manufacturing processes. Moreover, the series covers the computational methods and optimization techniques applied in manufacturing and surface engineering. Contributions to this book series are welcome on all subjects of manufacturing and surface engineering. Especially welcome are books that pioneer new research directions, raise new questions and new possibilities, or examine old problems from a new angle. To submit a proposal or request further information, please contact Dr. Mayra Castro, Publishing Editor Applied Sciences, via [email protected] or Professor J. Paulo Davim, Book Series Editor, via [email protected]
More information about this subseries at http://www.springer.com/series/10623
Pawel Pawlus Andrzej Dzierwa Agnieszka Lenart •
•
Dry Gross Fretting of Rough Surfaces Influential Parameters
123
Pawel Pawlus Department of Manufacturing Processes and Production Engineering Rzeszów University of Technology Rzeszów, Poland
Andrzej Dzierwa Department of Manufacturing Processes and Production Engineering Rzeszów University of Technology Rzeszów, Poland
Agnieszka Lenart EME Aero Sp. z o. o. Jasionka, Poland
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2365-8223 ISSN 2365-8231 (electronic) Manufacturing and Surface Engineering ISBN 978-3-030-31562-7 ISBN 978-3-030-31563-4 (eBook) https://doi.org/10.1007/978-3-030-31563-4 © The Author(s), under exclusive license to Springer Nature Switzerland AG 2020 This work is subject to copyright. All rights are solely and exclusively licensed b
Data Loading...
