Form Finding and Evaluating Through Machine Learning: The Prediction of Personal Design Preference in Polyhedral Structu
3D Graphic Statics (3DGS) is a geometry-based structural design and analysis method, helping designers to generate 3D polyhedral forms by manipulating force diagrams with given boundary conditions. By subdividing 3D force diagrams with different rules, a
- PDF / 22,960,671 Bytes
- 323 Pages / 453.543 x 683.15 pts Page_size
- 84 Downloads / 182 Views
itectural Intelligence Selected Papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019)
Architectural Intelligence
Philip F. Yuan Mike Xie Neil Leach Jiawei Yao Xiang Wang •
•
•
•
Editors
Architectural Intelligence Selected Papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019)
123
Editors Philip F. Yuan College of Architecture and Urban Planning Tongji University Shanghai, China
Mike Xie School of Engineering Cluster Civil and Infrastructure Engineering Melbourne, VIC, Australia
Neil Leach College of Architecture and Urban Planning Tongji University Shanghai, China
Jiawei Yao College of Architecture and Urban Planning Tongji University Shanghai, China
Xiang Wang College of Architecture and Urban Planning Tongji University Shanghai, China
Funded by National Key R&D Program of China (Grant No.2016YFC0702104), Shanghai Science and Technology Committee (Grant No.17dz1203405) and College of Architecture and Urban Planning (CAUP), Tongji University, China.
ISBN 978-981-15-6567-0 ISBN 978-981-15-6568-7 https://doi.org/10.1007/978-981-15-6568-7
(eBook)
© Springer Nature Singapore Pte Ltd. 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Singapore Pte Ltd. The registered company address is: 152 Beach Road, #21-01/04 Gateway East, Singapore 189721, Singapore
Committees
Honorary Advisors • Prof. Dr. Jiaping LIU, Xi’an University of Architecture and Technology, China • Prof. Dr. Zhiqiang WU, Tongji University, China • Executive chief architect, Weiping SHAO, Beijing Institute of Architectural Design, China • Prof. Dr. Guoqiang LI, Tongji University, China • Director, Bernard STIGLER, Centre Georges-Pompidou, France • Prof. Dr. Philippe BLOCK, ETH Zurich, Switzerland • Prof. D
