Seismic Design of Industrial Facilities Proceedings of the Internati

Seismic Design of Industrial Facilities demands a deep knowledge on the seismic behaviour of the individual structural and non-structural components of the facility, possible interactions and last but not least the individual hazard potential of primary a

  • PDF / 36,410,069 Bytes
  • 623 Pages / 490 x 697 pts Page_size
  • 45 Downloads / 207 Views

DOWNLOAD

REPORT


Seismic Design of Industrial Facilities Proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)

Seismic Design of Industrial Facilities

Sven Klinkel ⋅ Christoph Butenweg ⋅ Britta Holtschoppen ⋅ Gao Lin Editors

Seismic Design of Industrial Facilities Proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)

Editors Sven Klinkel Lehrstuhl für Baustatik u. Baudynamik RWTH Aachen Aachen, Germany

Britta Holtschoppen Lehrstuhl für Baustatik u. Baudynamik RWTH Aachen Aachen, Germany

Christoph Butenweg Lehrstuhl für Baustatik u. Baudynamik RWTH Aachen Aachen, Germany

Gao Lin Faculty of Infrastructure Engineering Dalian University of Technology No.2 Dalian City, China

ISBN 978-3-658-02809-1 DOI 10.1007/978-3-658-02810-7

ISBN 978-3-658-02810-7 (eBook)

Library of Congress Control Number: ########

Picture Credits for this book cover (from left to right): Lanxess AG, AkzoNobel, BASF SE, LBB (RWTH Aachen Univ.), BASF SE Springer Vieweg © Springer Fachmedien Wiesbaden 2014 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Printed on acid-free paper. Springer is part of Springer Science+Business Media www.springer.com

Preface

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

24 25 26 27

Devastating earthquakes in China (2008 and 2010), New Zealand (2011), Japan (2011) and Italy (2012) have tightened the social and the political focus on the seismic risk emanating from industrial facilities. Seismic Design of Industrial Facilities, however, demands a deep knowledge on the seismic behaviour of the individual structural and non-structural components of the facility, possible interactions and last but not least the individual hazard potential of primary and secondary damages. From 26.–27. September 2013 the International Conference on Seismic Design of Industrial Facilities firstly addresses this broad field of work and research in one specialized conference. It brings together academics, researchers and professional engineers in order to discuss the challenges of seismic design for new and existing industrial facilities and to compile innovative current research. This volume contains more than 50 contributions to the SeDIF-Conf