Slot-die coating may enable continuous printing of light-emitting electrochemical cells
- PDF / 352,035 Bytes
- 2 Pages / 585 x 783 pts Page_size
- 70 Downloads / 160 Views
“Needle beam” propagates without diffraction
A
n international team of researchers have demonstrated a new type of light beam that propagates without spreading outwards, remaining very narrow and controlled over an unprecedented distance. This “needle beam,” as the team calls it, may greatly reduce signal loss for on-chip optical systems such as used in nanophotonics, and may eventually assist the development of a more powerful class of microprocessors. Federico Capasso of the Harvard School of Engineering and Applied Sciences (SEAS); Patrice Genevet, a research associate in Capasso’s group; Jean Dellinger of the Laboratoire Interdisciplinaire Carnot de Bourgogne, CNRS, in France; and their colleagues have characterized and created this needle beam, which travels efficiently at the interface of gold and air. Their findings were published in the August 31 online edition of Physical Review Letters (10.1103/PhysRevLett.109.093904). The needle beam arises from surface plasmons, a special class of quasiparticles, which travel in tight con-
Slot-die coating may enable continuous printing of lightemitting electrochemical cells
S
ince the arrival of organic lightemitting diodes (OLEDs), the possibility of being able to economically print off rolls of electronic newspa-
884
MRS BULLETIN
•
VOLUME 37 • OCTOBER 2012
•
efficiently. The researchers also demonstrated the versatility of their battery design by connecting nine of them in parallel for a total energy of about 0.65 Wh. The research team glued an inexpensive polycrystalline silicon solar-cell array to the top of one cell and connected it with a current-limiter circuit. When fully
finement with a metal surface. The metallic stripes that carry these surface plasmons have the potential to replace standard copper electrical interconnects in microprocessors, enabling ultrafast on-chip communications. One of the fundamental problems that has so far hindered the development of such optical interconnects is the fact that all waves naturally spread laterally during propagation, known as diffraction. This reduces the portion of the signal that can actually be detected. “We have made a major step toward solving this problem by discovering and experimentally confirming the existence of a previously overlooked solution of Maxwell’s equations that govern all light phenomena,” said Capasso, the Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering at SEAS. “The solution is a highly localized surface plasmon wave that propagates for a long distance, approximately 80 microns in our experiments, in a straight line without any diffraction.” The so-called needle beam, the technical term for which is a cosine-Gauss plasmon beam, propagates in tight confinement with a nanostructured metal
per has become an exciting prospect. However, the continuous production of OLEDs under ambient conditions has been frustrated by the requirement for low-work-function cathode materials and a thin active layer. A promising alternative t
Data Loading...
