Systems Engineering
How are the kinematics and compliance of an axis implemented in the model. What is the role of measurements of elastomeric bearings and how do you determine the necessary parameters?
- PDF / 10,718,291 Bytes
- 296 Pages / 476.28 x 680.32 pts Page_size
- 49 Downloads / 213 Views
Simulation in Chassis Technology A Practice-oriented Introduction to the Creation of Component and Full Vehicle Models Using the Method of Multi-Body Systems
Simulation in Chassis Technology
Dirk Adamski
Simulation in Chassis Technology A Practice-oriented Introduction to the Creation of Component and Full Vehicle Models Using the Method of Multi-Body Systems
Dirk Adamski Automotive and Aerospace Engineering UAS Hamburg Hamburg, Germany
ISBN 978-3-658-30677-9 ISBN 978-3-658-30678-6 https://doi.org/10.1007/978-3-658-30678-6
(eBook)
The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content. # Springer Fachmedien Wiesbaden GmbH, part of Springer Nature 2021 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Fachmedien Wiesbaden GmbH, part of Springer Nature. The registered company address is: Abraham-Lincoln-Str. 46, 65189 Wiesbaden, Germany
Writing is easy. All you have to do is cross out the wrong words Mark Twain
Preface
The method of multi-body systems (MBS) described in this book is a standard for the vehicle dynamics and ride comfort simulation of chassis and full vehicles. Here, however, it is not the method itself that is in the foreground, but its application. Above all, the implementation of questions which a computational engineer in the abovementioned disciplines is confronted with on a daily basis will be discussed here. This means that the formulas and derivations necessary for understanding the method are usually not to be found here. However, you will find many practical examples and of course the equations used for this. Of course, the profession of computational engineer and the fear of differential equations do not fit together. Nevertheless, I as
Data Loading...
