Technology and Manufacturing Process Selection The Product Life Cycl
This book provides specific topics intending to contribute to an improved knowledge on Technology Evaluation and Selection in a Life Cycle Perspectives. Although each chapter will present possible approaches and solutions, there are no recipes for success
- PDF / 15,198,235 Bytes
- 326 Pages / 453.543 x 683.15 pts Page_size
- 27 Downloads / 224 Views
Elsa Henriques Paulo Peças Arlindo Silva Editors
Technology and Manufacturing Process Selection The Product Life Cycle Perspective
Springer Series in Advanced Manufacturing
Series editor Duc Truong Pham, Cardiff, UK
For further volumes: http://www.springer.com/series/7113
Elsa Henriques Paulo Peças Arlindo Silva •
Editors
Technology and Manufacturing Process Selection The Product Life Cycle Perspective
123
Editors Elsa Henriques Paulo Peças Arlindo Silva IDMEC, Instituto Superior Técnico Universidade de Lisboa Lisbon Portugal
ISSN 1860-5168 ISBN 978-1-4471-5543-0 DOI 10.1007/978-1-4471-5544-7
ISSN 2196-1735 (electronic) ISBN 978-1-4471-5544-7 (eBook)
Springer London Heidelberg New York Dordrecht Library of Congress Control Number: 2013953217 Springer-Verlag London 2014 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Editorial Board
Wim Dewulf, Katholieke Universiteit Leuven, Leuven, Belgium Joost Duflou, Katholieke Universiteit Leuven, Leuven, Belgium Paulo Ferrão, Universidade de Lisboa, Lisbon, Portugal Michael Z. Hauschild, Technical University of Denmark, Lyngby, Denmark Elsa Henriques, Universidade de Lisboa, Lisbon, Portugal Paulo Martins, Universidade de Lisboa, Lisbon, Portugal Paulo Peças, Universidade de Lisboa, Lisbon, Portugal Roy Raj
Data Loading...