Towards an integrated materials characterization toolbox
- PDF / 2,507,146 Bytes
- 43 Pages / 584.957 x 782.986 pts Page_size
- 22 Downloads / 185 Views
Towards an integrated materials characterization toolbox Ian M. Robertsona) Department of Materials Science and Engineering, University of Illinois, Urbana, Illinois 61801
Christopher A. Schuhb) Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
John S. Vetrano Materials Sciences and Engineering Division, Office of Basic Energy Sciences, U.S. Department of Energy, Washington, District of Columbia 20585
Nigel D. Browning Department of Chemical Engineering and Materials Science and Department of Molecular and Cellular Biology, University of California—Davis, Davis, California 95616; and Condensed Matter and Materials Division, Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, California 94550
David P. Field School of Mechanical and Materials Engineering, Washington State University, Pullman, Washington 99164
Dorte Juul Jensen Risø National Laboratory for Sustainable Energy, Materials Research Division, Technical University of Denmark, 4000 Roskilde, Denmark
Michael K. Miller Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831
Ian Baker Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire 03755
David C. Dunand Department of Materials Science and Engineering, Northwestern University, Evanston, Illinois 60208
Rafal Dunin-Borkowski Center for Electron Nanoscopy, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark
Bernd Kabius Materials Science Division, Argonne National Laboratory, Argonne, Illinois 60439
Tom Kelly Cameca Instruments Corporation, Madison, Wisconsin 53711
Sergio Lozano-Perez Department of Materials, University of Oxford, Oxford OX1 3PH, United Kingdom
Amit Misra MPA-CINT, MS K771, Los Alamos National Laboratory, Los Alamos, New Mexico 87545
Gregory S. Rohrer and Anthony D. Rollett Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213
Mitra L. Taheri Department of Materials Science and Engineering, Drexel University, Philadelphia, Pennsylvania 19104
Greg B. Thompson Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, Alabama 35487
Michael Uchic Materials & Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433
Xun-Li Wang Neutron Scattering Science Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831
Gary Was Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, Michigan 48109 a)
Address all correspondence to this author. e-mail: [email protected] This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs. org/jmr_policy DOI: 10.1557/jmr.2011.41 J. Mater. Res., Vol. 26, No. 11, Jun 14, 2011
http://journals.cambridge.org
Downloaded: 13 Mar 2015
Ó Materials Research Society 2011
1341 IP address: 131.
Data Loading...
