A comparative study between thermal etching and liquid exfoliation of bulk graphitic carbon nitride to nanosheets for th
- PDF / 3,402,603 Bytes
- 20 Pages / 595.276 x 790.866 pts Page_size
- 89 Downloads / 146 Views
A comparative study between thermal etching and liquid exfoliation of bulk graphitic carbon nitride to nanosheets for the photocatalytic degradation of a model environmental pollutant, Rhodamine B Nicholas Rono1
1 2
, Joshua K. Kibet2,*
, Bice S. Martincigh1
, and Vincent O. Nyamori1
School of Chemistry and Physics, University of KwaZulu-Natal, Westville Campus, Private Bag X54001, Durban 4000, South Africa Department of Chemistry, Egerton University, Njoro, P.O. Box 536-20115, Egerton, Kenya
Received: 12 June 2020
ABSTRACT
Accepted: 5 November 2020
Graphitic carbon nitride (g-C3N4) is a metal-free photoactive material which has gained significant interest in the advancement of electronic and optical devices because of its attractive optoelectronic properties, such as tuneable band gap, and suitable chemical and thermal stability. This material has been utilized in a range of applications including photocatalysis, biosensing and photovoltaics. Bulk g-C3N4 (B-g-C3N4) has been shown to exhibit low photo-efficiency due to its low specific surface area and high rate of recombination of photo-generated charges; thus, there is a need for its exfoliation. Also, the type of exfoliation method utilized is crucial. In this work, two exfoliation methods of g-C3N4, namely, liquid and thermal etching exfoliation, were investigated. Both methods successfully produced g-C3N4 nanosheets, but those synthesized by liquid exfoliation (CNNS-LE) had a much larger specific surface area of 41.68 m2 g-1 than those prepared by thermal exfoliation (CNNS-TE) (14.76 m2 g-1) or the parent B-g-C3N4 (3.22 m2 g-1). The band gap energies of B-g-C3N4, CNNS-LE and CNNS-TE were found to be 2.71, 2.59 and 1.89 eV, respectively. Graphitic carbon nitride nanosheets prepared by thermal exfoliation (CNNS-TE) were found to be 2.5 times more effective in the photo-degradation of Rhodamine B than B-g-C3N4 and CNNS-LE. This is attributed to the positive effect of their porous structure, which gives rise to effective separation of charges, and their extended light absorption properties. Thus, thermal treatment introduces structural defects and electronic modifications that result in an enhanced photocatalytic performance. Consequently, thermal etching is effective in exfoliation of B-g-C3N4 to form a material suitable for photo-driven applications.
Ó
Springer Science+Business
Media, LLC, part of Springer Nature 2020
Address correspondence to E-mail: [email protected]
https://doi.org/10.1007/s10854-020-04849-8
J Mater Sci: Mater Electron
Abbreviations B-g-C3N4 Bulk graphitic carbon nitride g-C3N4 Graphitic carbon nitride CNNS-LE Carbon nitride nanosheets obtained by liquid exfoliation CNNS-TE Carbon nitride nanosheets obtained by thermal exfoliation RhB Rhodamine B IPA Isopropyl alcohol TEOA Tri-ethanolamine CVD Chemical vapour deposition XRD X-ray diffraction SEM Scanning electron microscopy HRTEM High-resolution transmission electron microscopy TEM Transmission electron microscopy FTIR Fourier transform infrared ATR Attenuated total reflec
Data Loading...
