Conducted Electromagnetic Interference (EMI) in Smart Grids
As power systems develop to incorporate renewable energy sources, the delivery systems may be disrupted by the changes involved. The grid’s technology and management must be developed to form Smart Grids between consumers, suppliers and producers. Conduct
- PDF / 12,020,990 Bytes
- 175 Pages / 439.37 x 666.142 pts Page_size
- 67 Downloads / 243 Views
For further volumes: http://www.springer.com/series/4622
Robert Smolenski
Conducted Electromagnetic Interference (EMI) in Smart Grids
123
Robert Smolenski Faculty of Electrical Engineering, Computer Science, Telecommunications Institute of Electrical Engineering University of Zielona Góra Zielona Gora Poland
ISSN 1612-1287 ISBN 978-1-4471-2959-2 DOI 10.1007/978-1-4471-2960-8
e-ISSN 1860-4676 e-ISBN 978-1-4471-2960-8
Springer London Heidelberg New York Dordrecht Library of Congress Control Number: 2012934666 Springer-Verlag London 2012 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Acknowledgments
The author thanks Institute of Electrical Engineering members for their help and technical advices on this thesis. Special thanks go to Professors Grzegorz Benysek and Adam Kempski.
v
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xi
1
Power Electronic Interfaces in Smart Grids . . . . . . . . . . . . . . 1.1 Introduction to Smart Grids . . . . . . . . . . . . . . . . . . . . . . . 1.2 Role of Power Electronic Converters in Smart Grids . . . . . . 1.3 Power Electronic Converters as a Source of Conducted EMI References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Data Loading...
