Continuum Mechanics and Theory of Materials
This treatise attempts to portray the ideas and general principles of the theory of materials within the framework of phenomenological continuum mechanics. It is a well-written mathematical introduction to classical continuum mechanics and deals with conc
- PDF / 2,628,475 Bytes
- 24 Pages / 439.37 x 666.142 pts Page_size
- 51 Downloads / 220 Views
ACHARYA, A.; SHAWKI, T.G.: The Clausius-Duhem Inequality and the Structure of Rate-Independent Plasticity. Int. J. Plasticity 12 [1996], 229-238 ALBER, H.-D.: Materials with Memory. Initial-Boundary Value Problems for Constitutive Equations with Internal Variables. Springer-Verlag [1998] ALTENBACH, J.; ALTENBACH, H.: Einführung in die Kontinuumsmechanik. B.G. Teubner [1994] ANAND, L.; BALASUBRAMANIAN, S.; KOTHARI, M.: Constitutive Modelling of Polycrystalline Metals at Large Strains. In: Large Plastic Deformation of Crystalline Aggregates. CISM Courses and Lectures No. 376. Springer-Verlag [1997], 109 172 ANTHONY, K.-H.: Die Reduktion von nichteuklidischen geometrischen Objekten in eine euklidische Form und physikalische Deutung der Reduktion durch Eigenspannungszustände in Kristallen. Arch. Rat. Mech. Anal. 37 [1970],161-180 ARMSTRONG, P.J.; FREDERICK, C.O.: A Mathematical Representation of the Multiaxial Bauschinger Effect. General Electricity Generating Board, Report No. RD/B/N/731 [1966] ASARO, R.J.: Micromechanics of Crystals and Polycrystals. In: Wu T.Y.; Hutchinson, J.W. (Eds.): Advances in Applied Mechanics 23 [1983a], 1-115 ASARO, R.J.: Crystal Plasticity. Journal of Applied Mechanics 50 [1983b], 921-934 BACKHAUS, E.: Progress Report on the Project DFG Ha 2075/1. University of Dresden, Institute of Mechanics [1997] BAEHR, H.D.: Thermodynamik. Springer-Verlag [1973] BALKE, H.: Zur Objektivität mikromechanisch motivierter Kriechgleichungen. Technische Mechanik 18 [1998], 203-208 BANABIC, D.; BUNGE, H.-J.; PÖHLAND, K.; TEKKAYA, A.E.: Formability of Metallic Materials. Springer-Verlag [2000] BECKER, E.; BÜRGER, W.: Kontinuumsmechanik. B.G. Teubner [1975] BELL, J.F.: The Experimental Foundation of Solid Mechanics. Encyclopedia of Physics, Vol. VIa/I. Springer-Verlag [1973]
References
620
BERTRAM, A.: An Alternative Approach to Finite Plasticity Based on Material Isomorhisms. Int. J. Plasticity 15 [1999], 353 - 374 BERTRAM, A.: Axiomatische Einführung in die Kontinuummechanik. B.I. Wissenschaftsverlag [1989] BERTRAM, A.; HAUPT, P.: A Note of Andreussi-Guidugli's Theory of Thermomechanical Constraints in Simple Materials. Bulletin de l'Academie Polonaise des Sciences 6 [1976], 47-51 BERTRAM, A.; BÖHLKE, T.; KRASKA, M.: Numerical Simulation of Deformation Induced Anisotropy of Polycrystals. Computational Materials Science 9 [1997], 158 - 167
BERTRAM, A.; KRASKA, M.: Description of Finite Plastic Deformations in Single Crystals by Material Isomorphisms. In: Parker, D.F.; Enland, A.H. (Eds): IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics. Kluwer Academic Publishers [1995], 77-99 BERTRAM, A.; SVENDSEN, B.: On Material Objectivity and Reduced Constitutive Equations. Preprint IFME 97/2, Institut für Mechanik der Universität Magdeburg [1997] BESDO, D.: Zur Formulierung von Stoffgesetzen der Plastomechanik im Dehnungsraum nach Ilyushins Postulat. Ingenieur-Archiv 51 [1981], 1-8 BESDO, D.: Comparison of Strain- and Stress-Space Representations of Plasticity. In: F. Jinhong, S. Muraka
Data Loading...
