Design Thinking to Digital Thinking
This book outlines the paradigm shift from design to digital thinking. This book is primarily intended to provide researchers and students an overview of the current state of affairs dealing with design thinking process and its transition to digital era.&
- PDF / 1,162,837 Bytes
- 83 Pages / 439.371 x 666.143 pts Page_size
- 59 Downloads / 316 Views
Kaushik Kumar Divya Zindani J. Paulo Davim
Design Thinking to Digital Thinking
123
SpringerBriefs in Applied Sciences and Technology Manufacturing and Surface Engineering
Series Editor Joao Paulo Davim , Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
This series fosters information exchange and discussion on all aspects of manufacturing and surface engineering for modern industry. This series focuses on manufacturing with emphasis in machining and forming technologies, including traditional machining (turning, milling, drilling, etc.), non-traditional machining (EDM, USM, LAM, etc.), abrasive machining, hard part machining, high speed machining, high efficiency machining, micromachining, internet-based machining, metal casting, joining, powder metallurgy, extrusion, forging, rolling, drawing, sheet metal forming, microforming, hydroforming, thermoforming, incremental forming, plastics/composites processing, ceramic processing, hybrid processes (thermal, plasma, chemical and electrical energy assisted methods), etc. The manufacturability of all materials will be considered, including metals, polymers, ceramics, composites, biomaterials, nanomaterials, etc. The series covers the full range of surface engineering aspects such as surface metrology, surface integrity, contact mechanics, friction and wear, lubrication and lubricants, coatings an surface treatments, multiscale tribology including biomedical systems and manufacturing processes. Moreover, the series covers the computational methods and optimization techniques applied in manufacturing and surface engineering. Contributions to this book series are welcome on all subjects of manufacturing and surface engineering. Especially welcome are books that pioneer new research directions, raise new questions and new possibilities, or examine old problems from a new angle. To submit a proposal or request further information, please contact Dr. Mayra Castro, Publishing Editor Applied Sciences, via [email protected] or Professor J. Paulo Davim, Book Series Editor, via [email protected]
More information about this subseries at http://www.springer.com/series/10623
Kaushik Kumar Divya Zindani J. Paulo Davim •
•
Design Thinking to Digital Thinking
123
Kaushik Kumar Department of Mechanical Engineering Birla Institute of Technology Ranchi, Jharkhand, India
Divya Zindani Department of Mechanical Engineering National Institute of Technology Silchar, Assam, India
J. Paulo Davim Department of Mechanical Engineering University of Aveiro Aveiro, Portugal
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2365-8223 ISSN 2365-8231 (electronic) Manufacturing and Surface Engineering ISBN 978-3-030-31358-6 ISBN 978-3-030-31359-3 (eBook) https://doi.org/10.1007/978-3-030-31359-3 © The Author(s), under exclusive license to Springer Nature Switzerland AG 2020 This work is subject to copyright. All rights are solely and exclusively licensed by the Publisher, whether the whole or part of the material
Data Loading...
