Hybrid Machining Processes Perspectives on Machining and Finishing
This book describes various hybrid machining and finishing processes. It gives a critical review of the past work based on them as well as the current trends and research directions. For each hybrid machining process presented, the authors list the method
- PDF / 2,356,701 Bytes
- 75 Pages / 439.37 x 666.142 pts Page_size
- 64 Downloads / 267 Views
Kapil Gupta Neelesh K. Jain R.F. Laubscher
Hybrid Machining Processes Perspectives on Machining and Finishing 123
SpringerBriefs in Applied Sciences and Technology Manufacturing and Surface Engineering
Series editor Joao Paulo Davim, Aveiro, Portugal
More information about this series at http://www.springer.com/series/10623
Kapil Gupta Neelesh K. Jain R.F. Laubscher •
Hybrid Machining Processes Perspectives on Machining and Finishing
123
Kapil Gupta School of Mechanical and Industrial Engineering University of Johannesburg Johannesburg South Africa
R.F. Laubscher School of Mechanical and Industrial Engineering University of Johannesburg Johannesburg South Africa
Neelesh K. Jain Discipline of Mechanical Engineering Indian Institute of Technology Indore Indore India
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2365-8223 ISSN 2365-8231 (electronic) Manufacturing and Surface Engineering ISBN 978-3-319-25920-8 ISBN 978-3-319-25922-2 (eBook) DOI 10.1007/978-3-319-25922-2 Library of Congress Control Number: 2015953270 Springer Cham Heidelberg New York Dordrecht London © The Author(s) 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media (www.springer.com)
Preface
The more stringent requirements for enhanced quality of engineered products, especially those of miniature size and made from difficult-to-machine materials, have largely been responsible for the development and subsequent wide use of hybrid machining processes (HMPs). HMPs are variants of advanced machining processes (AMPs) that are combinations of either one or more specific AMP or an AMP combined with a conventional metal working process (usually some form of machining process) to achieve results that would not be possible with the individual constituent processes in isolation. HMPs may also include assistance of an additional external energ
Data Loading...
