Networked Predictive Control of Systems with Communication Constraints and Cyber Attacks
This book presents the latest results on predictive control of networked systems, where communication constraints (e.g., network-induced delays and packet dropouts) and cyber attacks (e.g., deception attacks and denial-of-service attacks) are considered.
- PDF / 8,521,272 Bytes
- 225 Pages / 453.543 x 683.15 pts Page_size
- 34 Downloads / 198 Views
Networked Predictive Control of Systems with Communication Constraints and Cyber Attacks
Networked Predictive Control of Systems with Communication Constraints and Cyber Attacks
Zhong-Hua Pang Guo-Ping Liu Donghua Zhou Dehui Sun •
•
Networked Predictive Control of Systems with Communication Constraints and Cyber Attacks
123
Zhong-Hua Pang North China University of Technology Beijing China Guo-Ping Liu University of South Wales Pontypridd UK
Donghua Zhou Shandong University of Science and Technology Qingdao China Dehui Sun North China University of Technology Beijing China
ISBN 978-981-13-0519-1 ISBN 978-981-13-0520-7 https://doi.org/10.1007/978-981-13-0520-7
(eBook)
Library of Congress Control Number: 2018941228 © Springer Nature Singapore Pte Ltd. 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Printed on acid-free paper This Springer imprint is published by the registered company Springer Nature Singapore Pte Ltd. part of Springer Nature The registered company address is: 152 Beach Road, #21-01/04 Gateway East, Singapore 189721, Singapore
To our respective families who are the source of our strength and inspiration.
Preface
In the past two decades, with the rapid development of computer, communication, and control technologies, networked control systems (NCSs) have found a wide range of applications including factory automation, teleoperation systems, transportation management, power systems, and sensor and actuator networks. This is due to the introduction of communication networks in the control loops, which offers many distinct advantages such as decreased wiring and power requirement, ease of installation and maintenance, high flexibility and reliability, long distance or wireless communication, as well as increased mobility and interoperability. At the same time, however, the use of communication networks makes NCSs not only subject to
Data Loading...