Preparation and characterization of CdS prepared by hydrothermal method
- PDF / 2,778,438 Bytes
- 15 Pages / 595.276 x 790.866 pts Page_size
- 7 Downloads / 256 Views
ORIGINAL PAPER: FUNCTIONAL COATINGS, THIN FILMS AND MEMBRANES ( I N CL U D I N G D E P O S I T I O N T E C H N I Q U E S )
Preparation and characterization of CdS prepared by hydrothermal method Hadia Kadhim Judran1 Nwar A. Yousif2 Selma M. H. AL-Jawad2 ●
●
1234567890();,:
1234567890();,:
Received: 30 June 2020 / Accepted: 16 October 2020 © Springer Science+Business Media, LLC, part of Springer Nature 2020
Abstract An attempt has been made to examine the Cd2+ source concentration effect in the structural, morphological, optical, electrical, and dark current features of CdS films. The nano films have been successfully carried out onto glass substrates by hydrothermal technique at 130 °C for 1 h. Cadmium sulfate salt was used as a source of Cd precursor with various concentrations 0.08, 0.12, 0.14, and 0.2 M. The polycrystalline nature with a mix of cubic and hexagonal system of CdS films structure with the discriminatory orientation of H(002)/C(111) was identified by X-ray diffraction studies. Further, the Field emission-scanning electron microscope (FE-SEM) analysis has revealed a unique morphology as strings-like and flower-like nanostructures. It was clearly observed the existence of CdS nanograins as building units with an average grain size of 24 nm and 15 nm of 0.08 M and 0.12 M CdS thin films, respectively. The computed optical band gap was found in the values range of 2.1–2.3 eV. The Electrical analysis revealed that variation in CdSO4 molarity reduced the electrical resistivity from 2.1 × 108 to 3 × 106 (Ω.cm). Photoconductivity studies showed that the best ratio of the photocurrent to the dark current ratio Iph/Id was 2 × 104 for CdS that was prepared with 0.12 M. The Photoconductivity properties of these films have been presented to show that such films can be useful for photodetector device applications. Graphical Abstract
Hydrothermal treatment
String-like and flower-like nanostructures
Preparation and Characterization of CdS prepared by hydrothermal method
Keywords
CdS thin films Hydrothermal technique Optical properties Electrical characteristics ●
* Selma M. H. AL-Jawad [email protected] 1
Electromechanical Engineering Department, University of Technology, Baghdad, Iraq
●
●
2
Applied physics department, School of Applied Sciences, University of Technology, Baghdad, Iraq
Journal of Sol-Gel Science and Technology
Highlights ● CdS films have been synthesized with different Cd salt concentrations that range from 0.08 M to 0.2 M by using simple and eco-friendly hydrothermal method. ● In this research, for the first time the effects of CdSO4 concentration on the structural, morphological, optical, and electrical characteristics of CdS films have been investigated. ● This work presents a study of the optoelectronic properties of the CdS film. ● To our knowledge, there is no report of the optoelectronic properties of the CdS film deposited via hydrothermal method.
1 Introduction Thin films of II–VI semiconductor compounds are considered to be the extreme auspicious materials, due to their moti
Data Loading...