Thin Film Metal-Oxides Fundamentals and Applications in Electron
Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable ener
- PDF / 611,117 Bytes
- 26 Pages / 439.37 x 666.142 pts Page_size
- 32 Downloads / 166 Views
Design of Heterogeneous Catalysts and the Application to the Oxygen Reduction Reaction Timothy P. Holme, Hong Huang, and Fritz B. Prinz
Abstract A method is developed to use ab initio calculations to predict what materials will have high catalytic activity for heterogeneous dissociative adsorption reactions. This method may be used to restrict the combinatorial possibilities of materials selection to a reasonable search space. The method is demonstrated for the test case of the oxygen reduction reaction, and it is shown that an Ag–Pt compound is superior to the standard Pt catalyst. Density functional theory was used to evaluate dissociative adsorption of oxygen on Agn .n D 4; 6; 8; 14/; Ptm .m D 2; 4; 8/, and Agn Ptm [.n; m/ D .4; 2/, (6, 2), (4, 4)] clusters. Stable adsorbed, dissociated, and activated states and energies were found. The AgPt compounds show enhanced performance over Ag and Pt clusters of comparable size. Calculated energy of associative and dissociative adsorption on Pt and Ag is in broad agreement with experiment. DFT models of oxygen adsorption and dissociation on slabs of Ag, Pt, and PtAgx were found to agree with experiments and cluster models. A model is given to explain the reactivity of oxygen with Pt and Ag. A Pt/Ag bilayer and a random alloy are examined through experiment and simulation to show that it is possible to fine tune electronic properties, and therefore reactivity for oxygen dissociation. The reactivity of these compounds toward oxygen is generally intermediate to that of pure Ag and Pt; thus a AgPt alloy is expected to be a better low-temperature catalyst for oxygen dissociation than pure Ag or Pt under nearly reversible conditions. Indeed, experiments confirm an Ag3 Pt2 alloy to show superior activity at lower than half the platinum loading. Stress analysis confirms that the altered electronic structure, and thus the enhanced catalytic activity, must be due to an alloying effect rather than a strain effect from lattice expansion.
T.P. Holme and F.B. Prinz () Mechanical Engineering Department, Stanford University, Stanford, CA 94305, USA e-mail: [email protected] H. Huang Department of Mechanical and Materials Engineering, Wright State University, Dayton, OH 45435, USA
S. Ramanathan (ed.), Thin Film Metal-Oxides: Fundamentals and Applications in Electronics and Energy, DOI 10.1007/978-1-4419-0664-9 10, c Springer Science+Business Media, LLC 2010
303
304
T.P. Holme et al.
10.1 Introduction Selection of catalyst materials with optimal properties is a combinatorial problem. Trial and error by brute force searches are expensive and do not yield greater scientific understanding about what makes a good catalyst. The efficiency and at least semiquantitative accuracy of ab initio simulations imply that calculations may help to search the large space of materials combinations, and furthermore calculations may give insight that enable intelligent catalyst design. The work of Hammer and N¨orskov laid the foundations for this field by elucidating the relation between the tra
Data Loading...
