C-MRS and E-MRS to Hold Symposium on Electronic and Optoelectronic Materials
- PDF / 1,001,366 Bytes
- 1 Pages / 576 x 777.6 pts Page_size
- 59 Downloads / 174 Views
German Furnace Technology
R o t a r y T u b u l a r F u r n a c e s for heat treatment of metallic and ceramic powders, waste and special waste, with or without protective gas, at temperatures up to 1100°C with metal tube, up to 1200°C with quartz tube, up to 1600°C with ceramic tube, up to 1900°C with saphire tube. Variable rotary speeds, tiltable, also without post consumption or other accessories available.
High temperature furnaces HT for universal heat treatment and sintering under air, gas and vacuum, short heating and cooling cycles, ceramic fibre or graphite felt insulation, 1400°C-1900°C, chamber volumes 4 to 52 liters.; special systems on request.
Induction remelt furnaces LIFUMAT-3.3-met
c e r a m i t e c Oct. 11-15,1994 Munich, Hall: 23, Booth: D10
The Value Builder For Furnaces:
«
MiczjH T h p n m Heinrich-Hertz-Platz 1 • D-92275 Hirschbach • Germany Tel. ++49-9665-91400 • Fax++49-9665-1720
Specialty Systems, Inc.
The Chinese Materials Research Society and the European Materials Research Society have agreed to hold a Joint Symposium on Electronic and Optoelectronic Materials in Beijing. The symposium is scheduled for December 15-16,1994, immediately before the IUMRS International Conference on Electronic Materials (ICEM '94) to be held in Hsinchu, Taiwan, so that attendees will have a chance to visit Beijing and Hsinchu in one trip. The symposium will bring together scientists who deal with materials, solid-state physics, and device and process engineering to exchange ideas and discuss problems, solutions, and future directions through both invited and contributed papers. English is the official language of the symposium. Emphasis will be on the following topics: • Bulk and epitaxial growth techniques (LEC, LPE, MOCVD, MBE, etc.), • Compound semiconductor materials, • Thin film materials, • Sensor materials and recording media, • Artificial optical crystals, • Nonlinear optical crystals, • Waveguide materials and devices, • Surface and interface structures of electronic and optoelectronic materials, • Materials technology for displays, • Materials and technologies for electronic interconnections and packaging, • Materials design and identification of defects and impurities, • Materials characterization, • Reliability and processing issues related to electronic and optoelectronic devices. One original and three copies of a camera-ready extended abstract (two pages with all information and text typed inside a 14.5 cm wide by 21.5 cm high rectangle) should be sent to Xiongfeng Yang, secretary general of the symposium, by September 15, 1994. Authors names, affiliations, and complete addresses with phone and fax numbers should be listed at the top of the abstract within the rectangle.
Travel Arrangements and Registration
for sample preparation of Spectroscopy, from 50 gr. to 1 kg, casting under air, gas or vacuum.
Micro
C-MRS and E-MRS to Hold Symposium on Electronic and Optoelectronic Materials
Phone (215) 866-6200 Fax (215) 866-7710 10 South Commerce Way Bethlehem, Pensylvania 18017
Visas a
Data Loading...
