Circuit Design on Plastic Foils
This book illustrates a variety of circuit designs on plastic foils and provides all the information needed to undertake successful designs in large-area electronics. The authors demonstrate architectural, circuit, layout, and device solutions and e
- PDF / 8,666,474 Bytes
- 138 Pages / 439.44 x 666.24 pts Page_size
- 2 Downloads / 256 Views
Series Editors Mohammed Ismail Department of Electrical & Computer Engineering, The Ohio State University, Dublin, Ohio, USA Mohamad Sawan École Polytechnique de Montréal, Montreal, Québec, Canada
For further volumes: http://www.springer.com/series/7381
Daniele Raiteri • Eugenio Cantatore Arthur H. M. Roermund
Circuit Design on Plastic Foils
1 3
Daniele Raiteri Department of Electrical Engineering Eindhoven University of Technology Eindhoven The Netherlands
Arthur H. M. Roermund Department of Electrical Engineering Eindhoven University of Technology Eindhoven The Netherlands
Eugenio Cantatore Department of Electrical Engineering Eindhoven University of Technology Eindhoven The Netherlands
ISSN 1872-082X ISSN 2197-1854 (electronic) ISBN 978-3-319-11426-2 ISBN 978-3-319-11427-9 (eBook) DOI 10.1007/978-3-319-11427-9 Springer Cham Heidelberg New York Dordrecht London Library of Congress Control Number: 2014953546 © Springer International Publishing Switzerland 2015 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Contents
1 Introduction������������������������������������������������������������������������������������������������ 1.1 Silicon and Plastic ������������������������������������������������������������������������������ 1.2 Challenges in Electronics on Flexible Substrates ������������������������������ 1.3 Book Aims and Overview ������������������������������������������������������������������ References ���������������������������������������������������������������������������������������������������
1 1 3 5 6
2 Applications of Large-area Electronics on Foil��������������������������������������� 9 2.1 From Miniaturization to Flexible Substrates �������������������������������������� 9 2.2 Applications ����������������������������������������������������������������������������������������
Data Loading...
