Determination of trace elements in Sergio mirim : an evaluation of sample preparation methods and detection techniques
- PDF / 352,626 Bytes
- 10 Pages / 595.276 x 790.866 pts Page_size
- 90 Downloads / 231 Views
RESEARCH ARTICLE
Determination of trace elements in Sergio mirim: an evaluation of sample preparation methods and detection techniques Jaime S. Mandlate 1,2,3 & Bruno M. Soares 2 & Carlos F. F. Andrade 4 & Leonir A. Colling 4 & Ednei G. Primel 2 & Marcia F. Mesko 5 & Fabio A. Duarte 1 Received: 6 December 2019 / Accepted: 3 April 2020 # Springer-Verlag GmbH Germany, part of Springer Nature 2020
Abstract In this work, some trace elements (As, Cd, Cr, Cu, and Pb) were determined for the first time in the crustacean Sergio mirim (Decapoda: Thalassinidea: Callianassidae) from Southern Coast (Rio Grande, RS) of Brazil. The trace element determination was carried out by graphite furnace atomic absorption spectrometry (GF AAS) and inductively coupled plasma mass spectrometry (ICP-MS). Different microwave radiation-based sample digestion methods were evaluated. The analyte concentration ranged from 1.45 to 3.70 μg g−1 for As, 0.615 to 0.942 μg g−1 for Cd, 0.884 to 7.20 μg g−1 for Cr, 122 to 275 μg g−1 for Cu, and 0.390 to 0.916 μg g−1 for Pb. The limits of quantification for As, Cd, Cr, Cu, and Pb were 0.12, 0.01, 0.16, 0.92, and 0.06 μg g−1, respectively. The accuracy was evaluated by results comparison between GF AAS and ICP-MS techniques, as well as by analysis of certified reference materials of fish muscle and oyster tissue, with agreement from 92 to 108%. The feasibility of using Sergio mirim as a promising environmental bioindicator candidate was evaluated, since that it is an abundant organism in the studied area (South cost of Brazil) as well as in other places around the world. Keywords Sergio mirim . Trace elements . Decapoda: Thalassinidea: Callianassidae . Sample preparation . GF AAS . ICP-MS
Introduction Daily, considerable amounts of pollutants reach the marine/ estuarine environment through transport and atmospheric deposition, natural erosion, geochemical cycles, and products Responsible editor: Philippe Garrigues Electronic supplementary material The online version of this article (https://doi.org/10.1007/s11356-020-08766-5) contains supplementary material, which is available to authorized users. * Fabio A. Duarte [email protected] 1
Departamento de Química, Universidade Federal de Santa Maria, Santa Maria, RS 97105-900, Brazil
2
Escola de Química e Alimentos, Universidade Federal do Rio Grande, Rio Grande, RS 96203-900, Brazil
3
Departamento de Química, Universidade Eduardo Mondlane, P.O. Box 252, Maputo, Mozambique
4
Instituto de Oceanografia, Universidade Federal do Rio Grande, Rio Grande, RS 96203-900, Brazil
5
Centro de Ciências Químicas, Farmacêuticas e de Alimentos, Universidade Federal de Pelotas, Pelotas, RS 96010-610, Brazil
from anthropogenic activities (Peirrce et al. 1998). Contamination by metals is currently one of the major environmental problems nowadays. This type of pollution also significantly affects the aquatic systems (estuaries, coastal lagoons, etc.), which are very dynamic systems, making it essential to study the effects on the organisms that inhabit them (Núñez-No
Data Loading...