Manufacturing Processes 2 Grinding, Honing, Lapping
The book series on manufacturing processes for engineers are the reference work for scientific and industrial experts. This volume on Grinding, Honing and Lapping starts from the basics of cutting edge engagement and describes the characteristics of abras
- PDF / 24,803,024 Bytes
- 452 Pages / 439.37 x 666.142 pts Page_size
- 92 Downloads / 215 Views
Fritz Klocke
Manufacturing Processes 2 Grinding, Honing, Lapping Translated by Aaron Kuchle
123
Professor Dr.-Ing. Dr.-Ing. E. h. Fritz Klocke Laboratory for Machine Tools and Production Engineering of RWTH Aachen University Manfred-Weck Building Steinbachstr. 19 52074 Aachen Germany [email protected]
Translator Aaron Kuchle Woosong University Woosong Language Institute 196-5 Jayang Dong Daejon 300-831 Dong Gu Republic of Korea (South Korea) [email protected]
ISBN 978-3-540-92258-2
e-ISBN 978-3-540-92259-9
DOI 10.1007/978-3-540-92259-9 RWTHedition ISSN 1865-0899
e-ISSN 1865-0902
Library of Congress Control Number: 2009920210 c Springer-Verlag Berlin Heidelberg 2009 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: deblik Berlin, Germany Printed on acid-free paper 9 8 7 6 5 4 3 2 1 springer.com
Preamble about Compendium “Manufacturing Processes’’
Key factors for quality and economic efficiency of industrial production are the choice of the manufacturing processes and their design. Manufacturing Technology is an elemental part of the fundamental knowledge of machining engineers. Also design engineers have to gain knowledge in this field, since they have high responsibility for the manufacturing costs. However, the students as well as practising experts who are willing to enhance their knowledge have the problem to collect information. To the current day there is no extensive, but still clear description of manufacturing processes focussing on the technology itself. In order to counter this necessity the compendium at hand is supposed to present an overall picture of the most common machining and non-machining manufacturing processes. Additional to the description of the techniques these volumes are desired to deliver an insight in the underlying physical principles whenever it is necessary for the understanding of the processes. The apportionment of the compendium “Manufacturing Processes” into Volume 1: Turning, Milling, Drilling Volume 2: Grinding, Honing, Lapping Volume 3: Electrical Erosion and Hybride Processes Volume 4: Forming Volume 5: Casting, Sintering, Rapid Prototyping groups techniques with similar active principles together. In front of the first volume is placed a techniqu
