Strength and Stiffness of Engineering Systems
Strength and Stiffness of Engineering Systems is a modern version of classical strength of materials information adapted to meet the needs of developing technology with its emphasis on interdisciplinary approaches. Subjects such as plasticity, fracture, c
- PDF / 39,136,356 Bytes
- 696 Pages / 504 x 720 pts Page_size
- 21 Downloads / 167 Views
Mechanical Engineering Series Frederick A. Leckie and Dominic J. Dal Bello, Strength and Stiffness of Engineering Systems G. Genta, Vibration Dynamics and Control R. Firoozian, Servomotors and Industrial Control Theory G. Genta and L. Morello, The Automotive Chassis, Volumes 1 & 2 F. A. Leckie and D. J. Dal Bello, Strength and Stiffness of Engineering Systems Wodek Gawronski, Modeling and Control of Antennas and Telescopes Makoto Ohsaki and Kiyohiro Ikeda, Stability and Optimization of Structures: Generalized Sensitivity Analysis A.C. Fischer-Cripps, Introduction to Contact Mechanics, 2nd ed. W. Cheng and I. Finnie, Residual Stress Measurement and the Slitting Method J. Angeles, Fundamentals of Robotic Mechanical Systems: Theory Methods and Algorithms, 3rd ed. J. Angeles, Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms, 2nd ed. P. Basu, C. Kefa, and L. Jestin, Boilers and Burners: Design and Theory J.M. Berthelot, Composite Materials: Mechanical Behavior and Structural Analysis I.J. Busch-Vishniac, Electromechanical Sensors and Actuators J. Chakrabarty, Applied Plasticity K.K. Choi and N.H. Kim, Structural Sensitivity Analysis and Optimization 1: Linear Systems K.K. Choi and N.H. Kim, Structural Sensitivity Analysis and Optimization 2: Nonlinear Systems and Applications G. Chryssolouris, Laser Machining: Theory and Practice V.N. Constantinescu, Laminar Viscous Flow G.A. Costello, Theory of Wire Rope, 2nd ed. K. Czolczynski, Rotordynamics of Gas-Lubricated Journal Bearing Systems M.S. Darlow, Balancing of High-Speed Machinery W. R. DeVries, Analysis of Material Removal Processes J.F. Doyle, Nonlinear Analysis of Thin-Walled Structures: Statics, Dynamics, and Stability J.F. Doyle, Wave Propagation in Structures: Spectral Analysis Using Fast Discrete Fourier Transforms, 2nd ed. P.A. Engel, Structural Analysis of Printed Circuit Board Systems A.C. Fischer-Cripps, Introduction to Contact Mechanics A.C. Fischer-Cripps, Nanoindentation, 2nd ed. J. Garc´ıa de Jal´on and E. Bayo, Kinematic and Dynamic Simulation of Multibody Systems: The Real-Time Challenge W.K. Gawronski, Advanced Structural Dynamics and Active Control of Structures W.K. Gawronski, Dynamics and Control of Structures: A Modal Approach G. Genta, Dynamics of Rotating Systems D. Gross and T. Seelig, Fracture Mechanics with Introduction to Micro-mechanics K.C. Gupta, Mechanics and Control of Robots R. A. Howland, Intermediate Dynamics: A Linear Algebraic Approach D. G. Hull, Optimal Control Theory for Applications J. Ida and J.P.A. Bastos, Electromagnetics and Calculations of Fields M. Kaviany, Principles of Convective Heat Transfer, 2nd ed. M. Kaviany, Principles of Heat Transfer in Porous Media, 2nd ed. E.N. Kuznetsov, Underconstrained Structural Systems P. Ladev`eze, Nonlinear Computational Structural Mechanics: New Approaches and Non-Incremental Methods of Calculation (continued after index)
Frederick A. Leckie r Dominic J. Dal Bello
Strength and Stiffness of Engineering Systems
123
Frederick A. Leckie University of Califo
