Industrial Measurements in Machining
This book includes the best papers from two conferences on machining and abrasive machining, organized in Poland on September 11-12, 2019. The chapters discuss classical topics and emerging methods and models in machining, measurement, and quality co
- PDF / 76,707,320 Bytes
- 302 Pages / 439.37 x 666.142 pts Page_size
- 0 Downloads / 201 Views
Grzegorz M. Królczyk Piotr Niesłony Jolanta Królczyk Editors
Industrial Measurements in Machining
Lecture Notes in Mechanical Engineering Series Editors Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Francesco Gherardini, Dipartimento Di Ingegneria, Università Di Modena E Reggio Emilia, Modena, Modena, Italy Vitalii Ivanov, Department of Manufacturing Engineering Machine and Tools, Sumy State University, Sumy, Ukraine Francisco Cavas-Martínez, Departamento de Estructuras, Universidad Politécnica de Cartagena, Cartagena, Murcia, Spain Justyna Trojanowska, Poznan University of Technology, Poznan, Poland
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor of your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.
More information about this series at http://www.springer.com/series/11236
Grzegorz M. Królczyk Piotr Niesłony Jolanta Królczyk •
•
Editors
Industrial Measurements in Machining
123
Editors Grzegorz M. Królczyk Politechnika Opolska Opole, Poland
Piotr Niesłony Politechnika Opolska Opole, Poland
Jolanta Królczyk Politechnika Opolska Opole, Poland
ISSN 2195-4356 ISSN 2195-4364 (electronic) Lecture Notes in Mechanical Engineering ISBN 978-3-030-49909-9 ISBN 978-3-030-49910-5 (eBook) https://doi.org/10.1007/978-3-030-49910-5 © Springer Nature Switzerland AG 2020 This work is subject to copyright. All rights are reserved by the Publisher, wh
